This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773415425 | 411 Count | 647 Count | 140 Count | 4.12 VDC | 0 VDC |
| 1773413624 | 409 Count | 644 Count | 139 Count | 4.12 VDC | 0 VDC |
| 1773411823 | 407 Count | 640 Count | 138 Count | 4.12 VDC | 0 VDC |
| 1773410023 | 406 Count | 638 Count | 138 Count | 4.12 VDC | 0 VDC |
| 1773408222 | 404 Count | 635 Count | 137 Count | 4.12 VDC | 0 VDC |
| 1773406422 | 402 Count | 632 Count | 136 Count | 4.12 VDC | 0 VDC |
| 1773404621 | 400 Count | 628 Count | 135 Count | 4.12 VDC | 0 VDC |
| 1773402820 | 399 Count | 626 Count | 135 Count | 4.12 VDC | 0 VDC |
| 1773401020 | 397 Count | 622 Count | 134 Count | 4.12 VDC | 0 VDC |
| 1773399219 | 395 Count | 618 Count | 133 Count | 4.16 VDC | 0 VDC |
| 1773397491 | 389 Count | 612 Count | 132 Count | 4.11 VDC | 0 VDC |
| 1773395691 | 388 Count | 610 Count | 132 Count | 4.11 VDC | 0 VDC |
| 1773393890 | 386 Count | 606 Count | 131 Count | 4.11 VDC | 0 VDC |
| 1773392090 | 381 Count | 600 Count | 127 Count | 4.11 VDC | 0 VDC |
| 1773390289 | 379 Count | 596 Count | 126 Count | 4.11 VDC | 0 VDC |
| 1773388490 | 378 Count | 594 Count | 126 Count | 4.11 VDC | 0 VDC |
| 1773386689 | 376 Count | 590 Count | 125 Count | 4.11 VDC | 0 VDC |
| 1773384888 | 374 Count | 587 Count | 124 Count | 4.11 VDC | 0 VDC |
| 1773383087 | 372 Count | 583 Count | 123 Count | 4.11 VDC | 0 VDC |
| 1773381287 | 371 Count | 581 Count | 123 Count | 4.1 VDC | 0 VDC |
| 1773379486 | 369 Count | 578 Count | 122 Count | 4.11 VDC | 0 VDC |
| 1773377686 | 367 Count | 574 Count | 121 Count | 4.11 VDC | 0 VDC |
| 1773375885 | 365 Count | 571 Count | 120 Count | 4.11 VDC | 0 VDC |
| 1773374084 | 364 Count | 569 Count | 120 Count | 4.11 VDC | 0 VDC |
| 1773372284 | 362 Count | 566 Count | 119 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)