This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778644850 | 81 Count | 486 Count | 78 Count | 0 VDC | 0 VDC |
| 1778643049 | 58 Count | 383 Count | 56 Count | 0 VDC | 0 VDC |
| 1778641249 | 37 Count | 287 Count | 36 Count | 0 VDC | 0 VDC |
| 1778639448 | 17 Count | 174 Count | 17 Count | 0 VDC | 0 VDC |
| 1778637647 | 214 Count | 1102 Count | 204 Count | 0 VDC | 0 VDC |
| 1778635847 | 194 Count | 994 Count | 185 Count | 0 VDC | 0 VDC |
| 1778634046 | 174 Count | 891 Count | 166 Count | 0 VDC | 0 VDC |
| 1778632245 | 155 Count | 808 Count | 148 Count | 0 VDC | 0 VDC |
| 1778630445 | 135 Count | 710 Count | 129 Count | 0 VDC | 0 VDC |
| 1778628644 | 116 Count | 620 Count | 111 Count | 0 VDC | 0 VDC |
| 1778626843 | 97 Count | 500 Count | 93 Count | 0 VDC | 0 VDC |
| 1778625043 | 78 Count | 405 Count | 75 Count | 0 VDC | 0 VDC |
| 1778623242 | 62 Count | 314 Count | 60 Count | 0 VDC | 0 VDC |
| 1778621443 | 39 Count | 217 Count | 38 Count | 0 VDC | 0 VDC |
| 1778619641 | 18 Count | 108 Count | 18 Count | 0 VDC | 0 VDC |
| 1778617846 | 243 Count | 1066 Count | 231 Count | 0 VDC | 0 VDC |
| 1778616039 | 223 Count | 963 Count | 212 Count | 0 VDC | 0 VDC |
| 1778614239 | 203 Count | 849 Count | 193 Count | 0 VDC | 0 VDC |
| 1778612438 | 185 Count | 745 Count | 176 Count | 0 VDC | 0 VDC |
| 1778610638 | 163 Count | 630 Count | 155 Count | 0 VDC | 0 VDC |
| 1778608837 | 126 Count | 524 Count | 119 Count | 0 VDC | 0 VDC |
| 1778607036 | 91 Count | 420 Count | 85 Count | 0 VDC | 0 VDC |
| 1778605238 | 58 Count | 278 Count | 53 Count | 0 VDC | 0 VDC |
| 1778601648 | 157 Count | 1097 Count | 150 Count | 0 VDC | 0 VDC |
| 1778599847 | 135 Count | 955 Count | 129 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)