This is the latest recevied telemetry packets stored in our database for station/object N7JVN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762223767 | 13.13 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1762221970 | 13.13 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1762220173 | 13.13 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1762218375 | 13.1 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1762216578 | 13.1 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1762214781 | 13.13 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1762212984 | 13.13 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1762211187 | 13.13 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1762209390 | 13.24 Volts | 88.57 Deg.F | 0 | 0 | 0 |
| 1762207593 | 13.13 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1762205796 | 13.13 Volts | 85.05 Deg.F | 0 | 0 | 0 |
| 1762203999 | 13.13 Volts | 85.05 Deg.F | 0 | 0 | 0 |
| 1762202202 | 13.1 Volts | 84.17 Deg.F | 0 | 0 | 0 |
| 1762200405 | 13.13 Volts | 83.29 Deg.F | 0 | 0 | 0 |
| 1762198609 | 13.13 Volts | 82.41 Deg.F | 0 | 0 | 0 |
| 1762196812 | 13.13 Volts | 81.53 Deg.F | 0 | 0 | 0 |
| 1762195016 | 13.1 Volts | 80.65 Deg.F | 0 | 0 | 0 |
| 1762193219 | 13.13 Volts | 79.77 Deg.F | 0 | 0 | 0 |
| 1762191422 | 13.1 Volts | 78.89 Deg.F | 0 | 0 | 0 |
| 1762189625 | 13.13 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1762187828 | 13.1 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1762186030 | 13.13 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1762184233 | 13.13 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1762182437 | 13.13 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1762180640 | 13.1 Volts | 75.37 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)