This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773458725 | 138 Count | 365 Count | 108 Count | 0 VDC | 0 VDC |
| 1773455123 | 126 Count | 332 Count | 98 Count | 0 VDC | 0 VDC |
| 1773453323 | 121 Count | 318 Count | 94 Count | 0 VDC | 0 VDC |
| 1773451522 | 116 Count | 304 Count | 90 Count | 0 VDC | 0 VDC |
| 1773449721 | 110 Count | 288 Count | 85 Count | 0 VDC | 0 VDC |
| 1773447921 | 104 Count | 275 Count | 80 Count | 0 VDC | 0 VDC |
| 1773446130 | 95 Count | 258 Count | 76 Count | 0 VDC | 0 VDC |
| 1773444327 | 89 Count | 244 Count | 71 Count | 0 VDC | 0 VDC |
| 1773442526 | 83 Count | 224 Count | 66 Count | 0 VDC | 0 VDC |
| 1773440726 | 77 Count | 209 Count | 61 Count | 0 VDC | 0 VDC |
| 1773438925 | 71 Count | 196 Count | 56 Count | 0 VDC | 0 VDC |
| 1773437124 | 66 Count | 184 Count | 52 Count | 0 VDC | 0 VDC |
| 1773435323 | 61 Count | 173 Count | 48 Count | 0 VDC | 0 VDC |
| 1773433523 | 55 Count | 160 Count | 43 Count | 0 VDC | 0 VDC |
| 1773428120 | 38 Count | 121 Count | 29 Count | 0 VDC | 0 VDC |
| 1773424527 | 22 Count | 82 Count | 19 Count | 0 VDC | 0 VDC |
| 1773422726 | 16 Count | 70 Count | 14 Count | 0 VDC | 0 VDC |
| 1773419125 | 4 Count | 11 Count | 4 Count | 0 VDC | 0 VDC |
| 1773417324 | 397 Count | 1027 Count | 313 Count | 0 VDC | 0 VDC |
| 1773415523 | 379 Count | 994 Count | 296 Count | 0 VDC | 0 VDC |
| 1773413722 | 373 Count | 979 Count | 291 Count | 0 VDC | 0 VDC |
| 1773411922 | 365 Count | 966 Count | 284 Count | 0 VDC | 0 VDC |
| 1773410121 | 359 Count | 952 Count | 279 Count | 0 VDC | 0 VDC |
| 1773408320 | 354 Count | 923 Count | 275 Count | 0 VDC | 0 VDC |
| 1773406519 | 349 Count | 906 Count | 271 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)