This is the latest recevied telemetry packets stored in our database for station/object S56KM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1757867883 | 8 | 35.5 C | 4.18 V | 170 M | 0 |
| 1757865369 | 11 | 37.9 C | 4.17 V | 170 M | 0 |
| 1757855357 | 8 | 33.8 C | 4.17 V | 60 M | 0 |
| 1757855196 | 8 | 33.3 C | 4.17 V | 140 M | 0 |
| 1757851568 | 9 | 33.4 C | 4.16 V | 230 M | 0 |
| 1757850991 | 9 | 31.5 C | 4.03 V | 170 M | 0 |
| 1757850481 | 9 | 31.5 C | 4.05 V | 60 M | 0 |
| 1757849880 | 8 | 31.3 C | 4.06 V | 150 M | 0 |
| 1757849280 | 9 | 30.8 C | 4.07 V | 170 M | 0 |
| 1757848694 | 9 | 30.6 C | 4.08 V | 110 M | 0 |
| 1757847621 | 5 | 29.7 C | 4.11 V | 560 M | 0 |
| 1757846505 | 10 | 30 C | 4.12 V | 580 M | 0 |
| 1757844881 | 7 | 32.3 C | 4.18 V | 510 M | 0 |
| 1757844001 | 10 | 31.6 C | 4.13 V | 470 M | 0 |
| 1757840949 | 8 | 32.3 C | 4.17 V | 440 M | 0 |
| 1757840657 | 9 | 32 C | 4.17 V | 800 M | 0 |
| 1757839265 | 10 | 32.8 C | 4.18 V | 570 M | 0 |
| 1757836116 | 9 | 32.1 C | 4.17 V | 570 M | 0 |
| 1757835064 | 9 | 31.9 C | 4.14 V | 540 M | 0 |
| 1757834090 | 7 | 31.3 C | 4.08 V | 500 M | 0 |
| 1757833602 | 9 | 29.8 C | 4.08 V | 170 M | 0 |
| 1757832798 | 7 | 27 C | 4.04 V | 130 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)