K0FTT Automobiles

My position About ☰

reset

DL4MDW-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4MDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vbat*	Vsol*	Pbat*	Temp*	AirP*
1761838296	2.52 V	0.48 V	-50 mW	23.67 degC	100300 Pa
1761838176	2.56 V	0.5 V	-52 mW	22.71 degC	100312.5 Pa
1761837936	2.64 V	0.53 V	-56 mW	21.51 degC	100300 Pa
1761837816	2.68 V	0.54 V	-56 mW	20.79 degC	100312.5 Pa
1761837696	2.71 V	0.56 V	-60 mW	20.04 degC	100300 Pa
1761837456	2.78 V	0.54 V	-64 mW	19.11 degC	100275 Pa
1761837336	2.82 V	0.56 V	-60 mW	18.43 degC	100275 Pa
1761837096	2.89 V	0.65 V	-60 mW	17.52 degC	100275 Pa
1761836976	2.9 V	0.65 V	-62 mW	17.25 degC	100250 Pa
1761836856	2.92 V	0.63 V	-68 mW	17.06 degC	100250 Pa
1761836736	2.94 V	0.57 V	-68 mW	16.8 degC	100225 Pa
1761836616	2.97 V	0.6 V	-68 mW	16.32 degC	100225 Pa
1761836496	3 V	0.61 V	-66 mW	15.82 degC	100237.5 Pa
1761836256	3.04 V	0.71 V	-66 mW	15.27 degC	100225 Pa
1761836136	3.06 V	0.71 V	-68 mW	15.06 degC	100200 Pa
1761835895	3.09 V	0.71 V	-66 mW	14.64 degC	100187.5 Pa
1761835776	3.1 V	0.71 V	-70 mW	14.59 degC	100162.5 Pa
1761835535	3.13 V	0.63 V	-74 mW	14.15 degC	100150 Pa
1761835415	3.14 V	0.64 V	-74 mW	13.87 degC	100175 Pa
1761835295	3.16 V	0.68 V	-52 mW	13.92 degC	100200 Pa
1761835175	3.18 V	0.82 V	-60 mW	13.64 degC	100162.5 Pa
1761834815	3.2 V	0.74 V	-64 mW	13.46 degC	100175 Pa
1761834695	3.22 V	0.79 V	-58 mW	13.25 degC	100162.5 Pa
1761834575	3.22 V	0.79 V	-62 mW	13.07 degC	100162.5 Pa
1761834455	3.22 V	0.75 V	-66 mW	13.05 degC	100150 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Pbat: 0, 2, -4096

Temp: 0, 0.01, 0

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)