This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757095907 | 0 Count | 328 Count | 0 Count | 2.98 VDC | 0 VDC |
| 1757092307 | 0 Count | 320 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1757088707 | 0 Count | 311 Count | 0 Count | 3.06 VDC | 0 VDC |
| 1757085106 | 0 Count | 303 Count | 0 Count | 3.03 VDC | 0 VDC |
| 1757081506 | 0 Count | 294 Count | 0 Count | 3.1 VDC | 0 VDC |
| 1757077906 | 0 Count | 286 Count | 0 Count | 3.08 VDC | 0 VDC |
| 1757074306 | 0 Count | 278 Count | 0 Count | 2.98 VDC | 0 VDC |
| 1757070706 | 0 Count | 269 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1757067106 | 0 Count | 261 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1757063505 | 0 Count | 246 Count | 0 Count | 2.97 VDC | 0 VDC |
| 1757059905 | 0 Count | 238 Count | 0 Count | 2.89 VDC | 0 VDC |
| 1757056305 | 0 Count | 230 Count | 0 Count | 2.85 VDC | 0 VDC |
| 1757052707 | 0 Count | 219 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1757049106 | 0 Count | 211 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1757045506 | 0 Count | 203 Count | 0 Count | 2.86 VDC | 0 VDC |
| 1757041906 | 0 Count | 195 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1757034706 | 0 Count | 178 Count | 0 Count | 2.95 VDC | 0 VDC |
| 1757031106 | 0 Count | 169 Count | 0 Count | 2.91 VDC | 0 VDC |
| 1757027505 | 0 Count | 158 Count | 0 Count | 2.98 VDC | 0 VDC |
| 1757023905 | 0 Count | 144 Count | 0 Count | 2.95 VDC | 0 VDC |
| 1757020305 | 0 Count | 124 Count | 0 Count | 2.97 VDC | 0 VDC |
| 1757016705 | 0 Count | 107 Count | 0 Count | 2.99 VDC | 0 VDC |
| 1757013105 | 0 Count | 97 Count | 0 Count | 3.05 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)