This is the latest recevied telemetry packets stored in our database for station/object F6JON-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773434404 | 25 Count | 32 Count | 25 Count | 0 VDC | 0 VDC |
| 1773432646 | 602 Count | 1040 Count | 572 Count | 0 VDC | 0 VDC |
| 1773430842 | 550 Count | 954 Count | 521 Count | 0 VDC | 0 VDC |
| 1773429039 | 526 Count | 919 Count | 498 Count | 0 VDC | 0 VDC |
| 1773427235 | 509 Count | 889 Count | 482 Count | 0 VDC | 0 VDC |
| 1773425431 | 476 Count | 847 Count | 450 Count | 0 VDC | 0 VDC |
| 1773423627 | 428 Count | 788 Count | 405 Count | 0 VDC | 0 VDC |
| 1773421823 | 410 Count | 759 Count | 388 Count | 0 VDC | 0 VDC |
| 1773420019 | 393 Count | 718 Count | 372 Count | 0 VDC | 0 VDC |
| 1773418215 | 367 Count | 677 Count | 349 Count | 0 VDC | 0 VDC |
| 1773416412 | 330 Count | 600 Count | 313 Count | 0 VDC | 0 VDC |
| 1773414608 | 300 Count | 528 Count | 284 Count | 0 VDC | 0 VDC |
| 1773412804 | 268 Count | 473 Count | 253 Count | 0 VDC | 0 VDC |
| 1773411044 | 236 Count | 426 Count | 222 Count | 0 VDC | 0 VDC |
| 1773409241 | 210 Count | 388 Count | 197 Count | 0 VDC | 0 VDC |
| 1773407437 | 182 Count | 320 Count | 170 Count | 0 VDC | 0 VDC |
| 1773405633 | 159 Count | 275 Count | 148 Count | 0 VDC | 0 VDC |
| 1773403829 | 135 Count | 236 Count | 125 Count | 0 VDC | 0 VDC |
| 1773402026 | 110 Count | 201 Count | 104 Count | 0 VDC | 0 VDC |
| 1773400222 | 86 Count | 156 Count | 81 Count | 0 VDC | 0 VDC |
| 1773398418 | 60 Count | 110 Count | 58 Count | 0 VDC | 0 VDC |
| 1773396615 | 36 Count | 66 Count | 36 Count | 0 VDC | 0 VDC |
| 1773394811 | 714 Count | 1001 Count | 595 Count | 0 VDC | 0 VDC |
| 1773393007 | 679 Count | 944 Count | 561 Count | 0 VDC | 0 VDC |
| 1773391203 | 654 Count | 898 Count | 538 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)