This is the latest recevied telemetry packets stored in our database for station/object EB1EGO-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742135238 | 417 | 0 | 0 | 0 | 0 |
| 1742134332 | 416 | 0 | 0 | 0 | 0 |
| 1742133433 | 403 | 0 | 0 | 0 | 0 |
| 1742132532 | 403 | 0 | 0 | 0 | 0 |
| 1742131638 | 401 | 0 | 0 | 0 | 0 |
| 1742130738 | 402 | 0 | 0 | 0 | 0 |
| 1742129838 | 406 | 0 | 0 | 0 | 0 |
| 1742128932 | 406 | 0 | 0 | 0 | 0 |
| 1742128032 | 406 | 0 | 0 | 0 | 0 |
| 1742127132 | 406 | 0 | 0 | 0 | 0 |
| 1742126232 | 407 | 0 | 0 | 0 | 0 |
| 1742125332 | 406 | 0 | 0 | 0 | 0 |
| 1742124432 | 406 | 0 | 0 | 0 | 0 |
| 1742123532 | 405 | 0 | 0 | 0 | 0 |
| 1742121731 | 406 | 0 | 0 | 0 | 0 |
| 1742120831 | 405 | 0 | 0 | 0 | 0 |
| 1742119932 | 404 | 0 | 0 | 0 | 0 |
| 1742119031 | 406 | 0 | 0 | 0 | 0 |
| 1742118131 | 407 | 0 | 0 | 0 | 0 |
| 1742117230 | 408 | 0 | 0 | 0 | 0 |
| 1742117153 | 370 | 0 | 0 | 0 | 0 |
| 1742116253 | 374 | 0 | 0 | 0 | 0 |
| 1742115353 | 371 | 0 | 0 | 0 | 0 |
| 1742114453 | 373 | 0 | 0 | 0 | 0 |
| 1742113551 | 385 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)