This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762211190 | 310 Count | 247 Count | 202 Count | 4.31 VDC | 0.14 VDC |
| 1762209387 | 305 Count | 240 Count | 198 Count | 4.27 VDC | 0.14 VDC |
| 1762207584 | 300 Count | 234 Count | 194 Count | 4.25 VDC | 0.14 VDC |
| 1762205813 | 294 Count | 225 Count | 189 Count | 4.26 VDC | 0.14 VDC |
| 1762204011 | 288 Count | 216 Count | 184 Count | 4.28 VDC | 0.14 VDC |
| 1762202208 | 282 Count | 207 Count | 179 Count | 4.24 VDC | 0.14 VDC |
| 1762200405 | 274 Count | 194 Count | 172 Count | 4.3 VDC | 0.14 VDC |
| 1762198602 | 269 Count | 187 Count | 168 Count | 4.3 VDC | 0.14 VDC |
| 1762196799 | 264 Count | 180 Count | 164 Count | 4.27 VDC | 0.14 VDC |
| 1762194996 | 259 Count | 173 Count | 160 Count | 4.3 VDC | 0.14 VDC |
| 1762193193 | 249 Count | 161 Count | 151 Count | 4.26 VDC | 0.14 VDC |
| 1762191391 | 246 Count | 159 Count | 149 Count | 4.3 VDC | 0.14 VDC |
| 1762189588 | 243 Count | 157 Count | 147 Count | 4.25 VDC | 0.14 VDC |
| 1762187785 | 239 Count | 154 Count | 144 Count | 4.32 VDC | 0.14 VDC |
| 1762184213 | 231 Count | 148 Count | 138 Count | 4.27 VDC | 0.14 VDC |
| 1762182410 | 228 Count | 146 Count | 136 Count | 4.28 VDC | 0.14 VDC |
| 1762180607 | 225 Count | 144 Count | 134 Count | 4.29 VDC | 0.14 VDC |
| 1762178804 | 222 Count | 142 Count | 132 Count | 4.27 VDC | 0.14 VDC |
| 1762177001 | 219 Count | 140 Count | 130 Count | 4.25 VDC | 0.14 VDC |
| 1762175199 | 213 Count | 135 Count | 125 Count | 4.26 VDC | 0.14 VDC |
| 1762173396 | 204 Count | 127 Count | 117 Count | 4.3 VDC | 0.14 VDC |
| 1762171593 | 196 Count | 120 Count | 110 Count | 4.24 VDC | 0.14 VDC |
| 1762169790 | 193 Count | 118 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762167987 | 190 Count | 116 Count | 106 Count | 4.26 VDC | 0.14 VDC |
| 1762166184 | 187 Count | 114 Count | 104 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)