This is the latest recevied telemetry packets stored in our database for station/object ON2LVC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
07/31/2025 6:07:42 PM+00:00 | 17 Nr | 14.09 Vdc | 0 | 0 | 0 |
07/31/2025 6:03:32 PM+00:00 | 15 Nr | 13.04 Vdc | 0 | 0 | 0 |
07/31/2025 5:59:52 PM+00:00 | 13 Nr | 14.07 Vdc | 0 | 0 | 0 |
07/31/2025 5:59:42 PM+00:00 | 11 Nr | 14.07 Vdc | 0 | 0 | 0 |
07/31/2025 4:13:50 PM+00:00 | 16 Nr | 13.1 Vdc | 0 | 0 | 0 |
07/31/2025 4:08:50 PM+00:00 | 17 Nr | 13.05 Vdc | 0 | 0 | 0 |
07/31/2025 3:37:25 PM+00:00 | 14 Nr | 14.14 Vdc | 0 | 0 | 0 |
07/31/2025 3:35:20 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:34:30 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:34:10 PM+00:00 | 14 Nr | 14.14 Vdc | 0 | 0 | 0 |
07/31/2025 3:34:00 PM+00:00 | 14 Nr | 14.14 Vdc | 0 | 0 | 0 |
07/31/2025 3:33:50 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:31:45 PM+00:00 | 15 Nr | 14.14 Vdc | 0 | 0 | 0 |
07/31/2025 3:31:05 PM+00:00 | 15 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:28:25 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:27:35 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:27:15 PM+00:00 | 14 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:23:50 PM+00:00 | 14 Nr | 14.11 Vdc | 0 | 0 | 0 |
07/31/2025 3:18:50 PM+00:00 | 14 Nr | 12.93 Vdc | 0 | 0 | 0 |
07/31/2025 3:13:50 PM+00:00 | 14 Nr | 12.98 Vdc | 0 | 0 | 0 |
07/31/2025 3:08:45 PM+00:00 | 13 Nr | 13.03 Vdc | 0 | 0 | 0 |
07/31/2025 3:03:45 PM+00:00 | 10 Nr | 14.16 Vdc | 0 | 0 | 0 |
07/31/2025 3:03:40 PM+00:00 | 11 Nr | 14.18 Vdc | 0 | 0 | 0 |
07/31/2025 3:03:30 PM+00:00 | 11 Nr | 14.18 Vdc | 0 | 0 | 0 |
07/31/2025 3:03:20 PM+00:00 | 11 Nr | 14.18 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)