This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768845574 | 12.8 Volts | 45.45 Deg.F | 0 | 0 | 0 |
| 1768843781 | 12.63 Volts | 42.81 Deg.F | 0 | 0 | 0 |
| 1768841988 | 12.66 Volts | 41.93 Deg.F | 0 | 0 | 0 |
| 1768840195 | 12.66 Volts | 41.93 Deg.F | 0 | 0 | 0 |
| 1768836610 | 12.63 Volts | 42.81 Deg.F | 0 | 0 | 0 |
| 1768833026 | 12.6 Volts | 41.93 Deg.F | 0 | 0 | 0 |
| 1768831233 | 12.63 Volts | 41.93 Deg.F | 0 | 0 | 0 |
| 1768827648 | 12.6 Volts | 41.93 Deg.F | 0 | 0 | 0 |
| 1768825855 | 12.6 Volts | 42.81 Deg.F | 0 | 0 | 0 |
| 1768824062 | 12.63 Volts | 42.81 Deg.F | 0 | 0 | 0 |
| 1768822269 | 12.63 Volts | 42.81 Deg.F | 0 | 0 | 0 |
| 1768820476 | 12.63 Volts | 43.69 Deg.F | 0 | 0 | 0 |
| 1768818683 | 12.63 Volts | 43.69 Deg.F | 0 | 0 | 0 |
| 1768816890 | 12.66 Volts | 43.69 Deg.F | 0 | 0 | 0 |
| 1768815097 | 12.66 Volts | 43.69 Deg.F | 0 | 0 | 0 |
| 1768811513 | 12.63 Volts | 44.57 Deg.F | 0 | 0 | 0 |
| 1768809720 | 12.63 Volts | 44.57 Deg.F | 0 | 0 | 0 |
| 1768807927 | 12.63 Volts | 44.57 Deg.F | 0 | 0 | 0 |
| 1768806135 | 12.66 Volts | 45.45 Deg.F | 0 | 0 | 0 |
| 1768804343 | 12.66 Volts | 45.45 Deg.F | 0 | 0 | 0 |
| 1768800758 | 12.66 Volts | 46.33 Deg.F | 0 | 0 | 0 |
| 1768797173 | 12.69 Volts | 47.21 Deg.F | 0 | 0 | 0 |
| 1768795381 | 12.69 Volts | 47.21 Deg.F | 0 | 0 | 0 |
| 1768793588 | 12.69 Volts | 47.21 Deg.F | 0 | 0 | 0 |
| 1768791796 | 12.69 Volts | 48.09 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)