This is the latest recevied telemetry packets stored in our database for station/object SP5BWN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768818866 | 37 | 508 | 0 | 399 | 7 |
| 1768817063 | 35 | 491 | 0 | 399 | 7 |
| 1768815260 | 34 | 475 | 0 | 399 | 7 |
| 1768813457 | 33 | 462 | 0 | 399 | 7 |
| 1768811654 | 32 | 432 | 0 | 399 | 7 |
| 1768809851 | 31 | 382 | 0 | 399 | 7 |
| 1768808048 | 30 | 370 | 0 | 399 | 7 |
| 1768806246 | 29 | 360 | 0 | 399 | 7 |
| 1768804443 | 28 | 345 | 0 | 399 | 7 |
| 1768802640 | 27 | 330 | 0 | 399 | 7 |
| 1768800837 | 25 | 318 | 0 | 398 | 7 |
| 1768799034 | 24 | 306 | 0 | 399 | 7 |
| 1768797230 | 21 | 291 | 0 | 399 | 7 |
| 1768795427 | 20 | 272 | 0 | 399 | 7 |
| 1768793624 | 19 | 258 | 0 | 405 | 7 |
| 1768791821 | 17 | 246 | 0 | 399 | 7 |
| 1768790018 | 16 | 234 | 0 | 399 | 7 |
| 1768788215 | 14 | 208 | 0 | 399 | 7 |
| 1768786412 | 13 | 190 | 0 | 399 | 7 |
| 1768784610 | 11 | 174 | 0 | 405 | 7 |
| 1768782807 | 10 | 159 | 0 | 404 | 7 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)