This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1757174887 | 6 | 29.9 C | 3.98 V | 520 M | 0 |
| 1757174563 | 5 | 29.5 C | 3.99 V | 550 M | 0 |
| 1757173912 | 7 | 29.1 C | 4.08 V | 530 M | 0 |
| 1757173556 | 6 | 27.9 C | 4.08 V | 540 M | 0 |
| 1757173353 | 5 | 27 C | 4.08 V | 510 M | 0 |
| 1757173193 | 5 | 26.1 C | 4.08 V | 580 M | 0 |
| 1757158188 | 6 | 31 C | 4.07 V | 700 M | 0 |
| 1757158027 | 6 | 30.1 C | 4.08 V | 490 M | 0 |
| 1757157867 | 5 | 29.2 C | 4.08 V | 490 M | 0 |
| 1757157707 | 6 | 27.8 C | 4.08 V | 470 M | 0 |
| 1757155208 | 8 | 26.2 C | 3.97 V | 500 M | 0 |
| 1757154408 | 10 | 24.5 C | 4 V | 490 M | 0 |
| 1757154249 | 9 | 24.4 C | 4.01 V | 490 M | 0 |
| 1757154088 | 9 | 24.5 C | 4.08 V | 500 M | 0 |
| 1757153928 | 8 | 23.8 C | 4.08 V | 510 M | 0 |
| 1757153768 | 5 | 23 C | 4.08 V | 500 M | 0 |
| 1757153111 | 8 | 21.4 C | 4.08 V | 510 M | 0 |
| 1757152951 | 7 | 20.5 C | 4.08 V | 500 M | 0 |
| 1757152791 | 6 | 19.6 C | 3.98 V | 490 M | 0 |
| 1757152631 | 6 | 19.5 C | 4.08 V | 490 M | 0 |
| 1757094546 | 5 | 21.9 C | 4.08 V | 460 M | 0 |
| 1757094387 | 6 | 20.8 C | 4.08 V | 500 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)