This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774462787 | 71 Count | 245 Count | 62 Count | 4.08 VDC | 0 VDC |
| 1774460988 | 64 Count | 232 Count | 56 Count | 4.08 VDC | 0 VDC |
| 1774459191 | 57 Count | 220 Count | 50 Count | 4.08 VDC | 0.56 VDC |
| 1774457392 | 49 Count | 186 Count | 43 Count | 4.08 VDC | 5.5 VDC |
| 1774455593 | 42 Count | 161 Count | 37 Count | 4.08 VDC | 5.5 VDC |
| 1774453795 | 35 Count | 133 Count | 31 Count | 4.08 VDC | 5.5 VDC |
| 1774451996 | 28 Count | 108 Count | 25 Count | 4.09 VDC | 5.5 VDC |
| 1774450198 | 21 Count | 86 Count | 19 Count | 4.09 VDC | 5.52 VDC |
| 1774448399 | 13 Count | 52 Count | 12 Count | 4.09 VDC | 5.52 VDC |
| 1774446600 | 6 Count | 26 Count | 6 Count | 4.1 VDC | 5.52 VDC |
| 1774444800 | 240 Count | 1028 Count | 202 Count | 4.1 VDC | 5.52 VDC |
| 1774443002 | 233 Count | 981 Count | 196 Count | 4.1 VDC | 5.52 VDC |
| 1774441203 | 226 Count | 935 Count | 190 Count | 4.1 VDC | 5.52 VDC |
| 1774439405 | 219 Count | 892 Count | 184 Count | 4.11 VDC | 5.54 VDC |
| 1774437606 | 212 Count | 847 Count | 178 Count | 4.11 VDC | 5.54 VDC |
| 1774435807 | 206 Count | 807 Count | 173 Count | 4.11 VDC | 5.52 VDC |
| 1774434008 | 199 Count | 761 Count | 167 Count | 4.12 VDC | 5.54 VDC |
| 1774432208 | 193 Count | 717 Count | 162 Count | 4.12 VDC | 5.52 VDC |
| 1774430410 | 185 Count | 661 Count | 155 Count | 4.13 VDC | 5.52 VDC |
| 1774428611 | 178 Count | 616 Count | 149 Count | 4.13 VDC | 5.52 VDC |
| 1774426813 | 172 Count | 577 Count | 144 Count | 4.17 VDC | 5.5 VDC |
| 1774425014 | 166 Count | 565 Count | 139 Count | 4.14 VDC | 4.56 VDC |
| 1774423216 | 160 Count | 539 Count | 134 Count | 4.12 VDC | 4.58 VDC |
| 1774421417 | 153 Count | 493 Count | 128 Count | 4.05 VDC | 5.5 VDC |
| 1774419617 | 146 Count | 417 Count | 122 Count | 4.05 VDC | 5.5 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)