This is the latest recevied telemetry packets stored in our database for station/object DF7RW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750002494 | 4.25 VDC | 14.66 VDC | 0 | 0 | 0 |
| 1749998894 | 4.18 VDC | 13.5 VDC | 0 | 0 | 0 |
| 1749995294 | 4.23 VDC | 14.12 VDC | 0 | 0 | 0 |
| 1749991694 | 4.21 VDC | 14.66 VDC | 0 | 0 | 0 |
| 1749988093 | 4.21 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1749984493 | 4.2 VDC | 14.64 VDC | 0 | 0 | 0 |
| 1749980893 | 4.21 VDC | 14.66 VDC | 0 | 0 | 0 |
| 1749977293 | 4.21 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1749973693 | 4.22 VDC | 13.86 VDC | 0 | 0 | 0 |
| 1749970093 | 4.2 VDC | 13.7 VDC | 0 | 0 | 0 |
| 1749966493 | 4.26 VDC | 13.74 VDC | 0 | 0 | 0 |
| 1749962893 | 4.2 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1749959293 | 4.23 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1749955692 | 4.18 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1749952092 | 4.23 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1749948492 | 4.17 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1749944892 | 4.27 VDC | 12.94 VDC | 0 | 0 | 0 |
| 1749941292 | 4.26 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1749937692 | 4.22 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1749934092 | 4.22 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1749930492 | 4.23 VDC | 13.08 VDC | 0 | 0 | 0 |
| 1749926892 | 4.2 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1749923291 | 4.25 VDC | 14.14 VDC | 0 | 0 | 0 |
| 1749919691 | 4.26 VDC | 14.36 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)