This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745121735 | 483 | 706 | 174 | 0 | 0 |
| 1745120132 | 494 | 722 | 173 | 0 | 0 |
| 1745118329 | 505 | 746 | 172 | 0 | 0 |
| 1745118102 | 505 | 749 | 171 | 0 | 0 |
| 1745116527 | 521 | 773 | 170 | 0 | 0 |
| 1745114735 | 537 | 800 | 169 | 0 | 0 |
| 1745114503 | 537 | 805 | 168 | 0 | 0 |
| 1745112949 | 553 | 827 | 167 | 0 | 0 |
| 1745111152 | 558 | 851 | 166 | 0 | 0 |
| 1745110903 | 569 | 852 | 165 | 0 | 0 |
| 1745109319 | 569 | 869 | 164 | 0 | 0 |
| 1745107516 | 585 | 890 | 163 | 0 | 0 |
| 1745107320 | 585 | 893 | 162 | 0 | 0 |
| 1745105716 | 591 | 908 | 161 | 0 | 0 |
| 1745103913 | 596 | 918 | 160 | 0 | 0 |
| 1745103703 | 591 | 917 | 159 | 0 | 0 |
| 1745102110 | 596 | 916 | 158 | 0 | 0 |
| 1745100309 | 585 | 903 | 157 | 0 | 0 |
| 1745100103 | 585 | 899 | 156 | 0 | 0 |
| 1745098508 | 575 | 878 | 155 | 0 | 0 |
| 1745096704 | 553 | 848 | 154 | 0 | 0 |
| 1745096503 | 548 | 844 | 153 | 0 | 0 |
| 1745094903 | 537 | 812 | 152 | 0 | 0 |
| 1745093101 | 515 | 774 | 151 | 0 | 0 |
| 1745092902 | 515 | 771 | 150 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)