This is the latest recevied telemetry packets stored in our database for station/object HP2DFA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761911048 | 5 Pkt/10m | 5 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761909848 | 4 Pkt/10m | 4 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761908648 | 3 Pkt/10m | 3 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761907447 | 8 Pkt/10m | 8 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761906247 | 5 Pkt/10m | 5 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761905046 | 7 Pkt/10m | 7 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761903846 | 4 Pkt/10m | 4 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761902646 | 5 Pkt/10m | 5 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761901446 | 6 Pkt/10m | 6 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761900245 | 5 Pkt/10m | 5 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761899045 | 6 Pkt/10m | 6 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761897845 | 6 Pkt/10m | 6 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761896644 | 6 Pkt/10m | 6 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761895444 | 7 Pkt/10m | 7 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761894244 | 5 Pkt/10m | 5 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761893043 | 9 Pkt/10m | 9 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1761891843 | 8 Pkt/10m | 8 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761890643 | 6 Pkt/10m | 6 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761889442 | 6 Pkt/10m | 6 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1761888242 | 5 Pkt/10m | 5 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761887041 | 6 Pkt/10m | 6 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1761885841 | 6 Pkt/10m | 6 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1761884641 | 7 Pkt/10m | 7 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761883441 | 6 Pkt/10m | 6 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761882240 | 6 Pkt/10m | 6 Pkt/10m | 3.78 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)