This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | CPU* | Tx* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746119866 | 12.1 Volts | 41 DegC | 17 pkts | 0 | 0 |
| 1746116266 | 12.1 Volts | 42 DegC | 18 pkts | 0 | 0 |
| 1746112666 | 12.3 Volts | 42 DegC | 15 pkts | 0 | 0 |
| 1746109066 | 12.4 Volts | 42 DegC | 18 pkts | 0 | 0 |
| 1746105466 | 12.4 Volts | 44 DegC | 18 pkts | 0 | 0 |
| 1746101866 | 12.5 Volts | 44 DegC | 14 pkts | 0 | 0 |
| 1746098267 | 12.4 Volts | 45 DegC | 21 pkts | 0 | 0 |
| 1746094666 | 12.5 Volts | 46 DegC | 14 pkts | 0 | 0 |
| 1746091066 | 12.5 Volts | 47 DegC | 17 pkts | 0 | 0 |
| 1746087467 | 12.7 Volts | 50 DegC | 16 pkts | 0 | 0 |
| 1746083867 | 12.7 Volts | 57 DegC | 18 pkts | 0 | 0 |
| 1746080267 | 12.8 Volts | 60 DegC | 23 pkts | 0 | 0 |
| 1746076667 | 13.8 Volts | 61 DegC | 18 pkts | 0 | 0 |
| 1746073067 | 13.7 Volts | 61 DegC | 24 pkts | 0 | 0 |
| 1746069466 | 14 Volts | 59 DegC | 18 pkts | 0 | 0 |
| 1746065867 | 14.1 Volts | 56 DegC | 22 pkts | 0 | 0 |
| 1746062267 | 13.9 Volts | 52 DegC | 28 pkts | 0 | 0 |
| 1746058666 | 13.3 Volts | 48 DegC | 27 pkts | 0 | 0 |
| 1746055066 | 13.6 Volts | 44 DegC | 21 pkts | 0 | 0 |
| 1746051467 | 13.3 Volts | 41 DegC | 18 pkts | 0 | 0 |
| 1746047866 | 12.4 Volts | 40 DegC | 21 pkts | 0 | 0 |
| 1746044266 | 12.2 Volts | 40 DegC | 20 pkts | 0 | 0 |
| 1746040667 | 12.3 Volts | 40 DegC | 19 pkts | 0 | 0 |
| 1746037067 | 12.3 Volts | 41 DegC | 18 pkts | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Tx: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)