This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788981440 | 174 Count | 218 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788980239 | 173 Count | 217 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788979038 | 172 Count | 216 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788977837 | 171 Count | 215 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1788976636 | 170 Count | 214 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788975436 | 169 Count | 213 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788974235 | 168 Count | 212 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788973034 | 167 Count | 211 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788971834 | 166 Count | 210 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788970633 | 165 Count | 209 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1788969445 | 164 Count | 208 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788968244 | 163 Count | 207 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788967043 | 162 Count | 206 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1788965843 | 161 Count | 205 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1788964642 | 160 Count | 204 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788963441 | 159 Count | 203 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788962240 | 158 Count | 197 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1788961039 | 157 Count | 196 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788959839 | 156 Count | 195 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1788958638 | 155 Count | 194 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1788957437 | 154 Count | 193 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788956236 | 153 Count | 192 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1788955036 | 152 Count | 191 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788953835 | 151 Count | 190 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1788947845 | 146 Count | 185 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)