This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781409715 | 271 Count | 783 Count | 208 Count | 0 VDC | 0 VDC |
| 1781407914 | 266 Count | 746 Count | 204 Count | 0 VDC | 0 VDC |
| 1781406113 | 260 Count | 712 Count | 199 Count | 0 VDC | 0 VDC |
| 1781404313 | 255 Count | 686 Count | 195 Count | 0 VDC | 0 VDC |
| 1781400711 | 245 Count | 641 Count | 187 Count | 0 VDC | 0 VDC |
| 1781398911 | 239 Count | 619 Count | 182 Count | 0 VDC | 0 VDC |
| 1781397110 | 233 Count | 603 Count | 177 Count | 0 VDC | 0 VDC |
| 1781395317 | 224 Count | 587 Count | 173 Count | 0 VDC | 0 VDC |
| 1781393516 | 219 Count | 573 Count | 169 Count | 0 VDC | 0 VDC |
| 1781391716 | 215 Count | 559 Count | 166 Count | 0 VDC | 0 VDC |
| 1781389915 | 209 Count | 541 Count | 161 Count | 0 VDC | 0 VDC |
| 1781388114 | 204 Count | 527 Count | 157 Count | 0 VDC | 0 VDC |
| 1781386313 | 202 Count | 522 Count | 156 Count | 0 VDC | 0 VDC |
| 1781384513 | 196 Count | 509 Count | 151 Count | 0 VDC | 0 VDC |
| 1781382712 | 191 Count | 491 Count | 147 Count | 0 VDC | 0 VDC |
| 1781380911 | 185 Count | 474 Count | 142 Count | 0 VDC | 0 VDC |
| 1781377310 | 176 Count | 435 Count | 135 Count | 0 VDC | 0 VDC |
| 1781375509 | 171 Count | 422 Count | 131 Count | 0 VDC | 0 VDC |
| 1781373716 | 163 Count | 409 Count | 128 Count | 0 VDC | 0 VDC |
| 1781371915 | 157 Count | 398 Count | 123 Count | 0 VDC | 0 VDC |
| 1781370115 | 151 Count | 387 Count | 118 Count | 0 VDC | 0 VDC |
| 1781368314 | 146 Count | 373 Count | 114 Count | 0 VDC | 0 VDC |
| 1781366513 | 141 Count | 363 Count | 110 Count | 0 VDC | 0 VDC |
| 1781364712 | 136 Count | 351 Count | 106 Count | 0 VDC | 0 VDC |
| 1781362912 | 130 Count | 339 Count | 101 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)