This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792921026 | 827 Count | 644 Count | 522 Count | 0 VDC | 0 VDC |
| 1792919222 | 824 Count | 641 Count | 520 Count | 0 VDC | 0 VDC |
| 1792917419 | 821 Count | 638 Count | 518 Count | 0 VDC | 0 VDC |
| 1792915616 | 818 Count | 636 Count | 516 Count | 0 VDC | 0 VDC |
| 1792913813 | 815 Count | 633 Count | 514 Count | 0 VDC | 0 VDC |
| 1792912009 | 812 Count | 630 Count | 512 Count | 0 VDC | 0 VDC |
| 1792910206 | 809 Count | 627 Count | 510 Count | 0 VDC | 0 VDC |
| 1792908446 | 806 Count | 624 Count | 508 Count | 0 VDC | 0 VDC |
| 1792906643 | 803 Count | 621 Count | 506 Count | 0 VDC | 0 VDC |
| 1792904839 | 800 Count | 618 Count | 504 Count | 0 VDC | 0 VDC |
| 1792903036 | 797 Count | 615 Count | 502 Count | 0 VDC | 0 VDC |
| 1792901233 | 794 Count | 613 Count | 500 Count | 0 VDC | 0 VDC |
| 1792899430 | 791 Count | 611 Count | 498 Count | 0 VDC | 0 VDC |
| 1792897626 | 782 Count | 609 Count | 496 Count | 0 VDC | 0 VDC |
| 1792895823 | 775 Count | 608 Count | 495 Count | 0 VDC | 0 VDC |
| 1792894019 | 768 Count | 605 Count | 493 Count | 0 VDC | 0 VDC |
| 1792892215 | 744 Count | 603 Count | 491 Count | 0 VDC | 0 VDC |
| 1792890412 | 733 Count | 601 Count | 489 Count | 0 VDC | 0 VDC |
| 1792888609 | 731 Count | 599 Count | 488 Count | 0 VDC | 0 VDC |
| 1792886844 | 728 Count | 596 Count | 486 Count | 0 VDC | 0 VDC |
| 1792885040 | 715 Count | 593 Count | 484 Count | 0 VDC | 0 VDC |
| 1792883237 | 704 Count | 590 Count | 482 Count | 0 VDC | 0 VDC |
| 1792881434 | 701 Count | 587 Count | 480 Count | 0 VDC | 0 VDC |
| 1792879630 | 698 Count | 584 Count | 478 Count | 0 VDC | 0 VDC |
| 1792877827 | 695 Count | 581 Count | 476 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)