This is the latest recevied telemetry packets stored in our database for station/object K5WH-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1749858628 | 2.35 V | 0.53 V | 46 mW | -35.2 degC | 14275 Pa |
| 1749858613 | 2.87 V | 1.02 V | 52 mW | -34.4 degC | 14275 Pa |
| 1749858508 | 3.13 V | 0.56 V | 62 mW | -32.3 degC | 14275 Pa |
| 1749858387 | 3.03 V | 0.52 V | 48 mW | -35.2 degC | 14275 Pa |
| 1749858267 | 2.43 V | 0.92 V | 42 mW | -38.9 degC | 14275 Pa |
| 1749858147 | 2.91 V | 0.74 V | 48 mW | -34.2 degC | 14250 Pa |
| 1749858026 | 2.87 V | 1.02 V | 52 mW | -34.4 degC | 14275 Pa |
| 1749857906 | 3.02 V | 1.02 V | 46 mW | -31.5 degC | 14250 Pa |
| 1749857786 | 2.92 V | 1.05 V | 64 mW | -33.6 degC | 14275 Pa |
| 1749857666 | 3.26 V | 1 V | 78 mW | -28.1 degC | 14225 Pa |
| 1749857545 | 3.94 V | 1.07 V | 72 mW | -27.4 degC | 14250 Pa |
| 1749857425 | 3.06 V | 1.04 V | 58 mW | -30 degC | 14237.5 Pa |
| 1749857305 | 3.02 V | 1.05 V | 64 mW | -33.2 degC | 14262.5 Pa |
| 1749857184 | 3.53 V | 0.7 V | 74 mW | -28.8 degC | 14187.5 Pa |
| 1749857064 | 3.19 V | 1.07 V | 78 mW | -34.1 degC | 14275 Pa |
| 1749856944 | 3.7 V | 1.1 V | 80 mW | -30.4 degC | 14187.5 Pa |
| 1749856824 | 4.04 V | 1.08 V | 80 mW | -25.8 degC | 14200 Pa |
| 1749856703 | 3.88 V | 1.12 V | 74 mW | -30.4 degC | 14250 Pa |
| 1749856583 | 3.23 V | 1.04 V | 72 mW | -25.4 degC | 14212.5 Pa |
| 1749856463 | 3.01 V | 1.01 V | 146 mW | -27.3 degC | 14225 Pa |
| 1749856451 | 2.88 V | 0.99 V | 92 mW | -24.1 degC | 14225 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)