This is the latest recevied telemetry packets stored in our database for station/object KB4MDD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745020741 | 13.19 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1745020736 | 13.13 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1745020622 | 13.19 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1745020602 | 13.07 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1745020525 | 13.19 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1745020109 | 13.04 Volts | 91.46 Deg.F | 0 | 0 | 0 |
| 1745020083 | 13.01 Volts | 91.46 Deg.F | 0 | 0 | 0 |
| 1745018647 | 12.98 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1745018575 | 13.01 Volts | 94.98 Deg.F | 0 | 0 | 0 |
| 1745014678 | 13.21 Volts | 99.37 Deg.F | 0 | 0 | 0 |
| 1745014565 | 13.21 Volts | 100.25 Deg.F | 0 | 0 | 0 |
| 1745014288 | 13.21 Volts | 102.89 Deg.F | 0 | 0 | 0 |
| 1745014278 | 13.19 Volts | 102.89 Deg.F | 0 | 0 | 0 |
| 1745014273 | 13.24 Volts | 102.89 Deg.F | 0 | 0 | 0 |
| 1745014235 | 13.21 Volts | 102.89 Deg.F | 0 | 0 | 0 |
| 1745014130 | 13.13 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1745014085 | 13.16 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1745014071 | 13.1 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1744999818 | 13.04 Volts | 92.34 Deg.F | 0 | 0 | 0 |
| 1744999757 | 13.04 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1744999695 | 13.1 Volts | 88.83 Deg.F | 0 | 0 | 0 |
| 1744999663 | 13.1 Volts | 87.95 Deg.F | 0 | 0 | 0 |
| 1744999644 | 13.16 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1744999616 | 13.04 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1744999611 | 13.07 Volts | 87.07 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)