This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785390629 | 327 Count | 972 Count | 71 Count | 0 VDC | 0 VDC |
| 1785387625 | 322 Count | 964 Count | 71 Count | 0 VDC | 0 VDC |
| 1785387025 | 321 Count | 962 Count | 71 Count | 0 VDC | 0 VDC |
| 1785385222 | 318 Count | 955 Count | 71 Count | 0 VDC | 0 VDC |
| 1785378011 | 303 Count | 929 Count | 68 Count | 0 VDC | 0 VDC |
| 1785377410 | 302 Count | 927 Count | 68 Count | 0 VDC | 0 VDC |
| 1785376810 | 301 Count | 926 Count | 68 Count | 0 VDC | 0 VDC |
| 1785376209 | 300 Count | 924 Count | 68 Count | 0 VDC | 0 VDC |
| 1785375608 | 299 Count | 922 Count | 68 Count | 0 VDC | 0 VDC |
| 1785375007 | 298 Count | 920 Count | 68 Count | 0 VDC | 0 VDC |
| 1785374407 | 297 Count | 919 Count | 68 Count | 0 VDC | 0 VDC |
| 1785373806 | 296 Count | 917 Count | 68 Count | 0 VDC | 0 VDC |
| 1785373205 | 295 Count | 916 Count | 68 Count | 0 VDC | 0 VDC |
| 1785372604 | 294 Count | 915 Count | 68 Count | 0 VDC | 0 VDC |
| 1785372004 | 293 Count | 913 Count | 68 Count | 0 VDC | 0 VDC |
| 1785371403 | 292 Count | 912 Count | 68 Count | 0 VDC | 0 VDC |
| 1785370802 | 291 Count | 911 Count | 68 Count | 0 VDC | 0 VDC |
| 1785370201 | 290 Count | 909 Count | 68 Count | 0 VDC | 0 VDC |
| 1785369600 | 289 Count | 908 Count | 68 Count | 0 VDC | 0 VDC |
| 1785369000 | 288 Count | 907 Count | 68 Count | 0 VDC | 0 VDC |
| 1785368399 | 287 Count | 905 Count | 68 Count | 0 VDC | 0 VDC |
| 1785367798 | 286 Count | 904 Count | 68 Count | 0 VDC | 0 VDC |
| 1785367197 | 285 Count | 903 Count | 68 Count | 0 VDC | 0 VDC |
| 1785366597 | 284 Count | 901 Count | 68 Count | 0 VDC | 0 VDC |
| 1785365996 | 283 Count | 900 Count | 68 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)