This is the latest recevied telemetry packets stored in our database for station/object SP9LJE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778678700 | 79 Count | 74 Count | 74 Count | 0 VDC | 0 VDC |
| 1778676899 | 60 Count | 56 Count | 56 Count | 0 VDC | 0 VDC |
| 1778675098 | 49 Count | 46 Count | 46 Count | 0 VDC | 0 VDC |
| 1778673298 | 38 Count | 36 Count | 36 Count | 0 VDC | 0 VDC |
| 1778671497 | 27 Count | 26 Count | 26 Count | 0 VDC | 0 VDC |
| 1778669696 | 16 Count | 16 Count | 16 Count | 0 VDC | 0 VDC |
| 1778667896 | 996 Count | 1008 Count | 913 Count | 0 VDC | 0 VDC |
| 1778666095 | 986 Count | 999 Count | 904 Count | 0 VDC | 0 VDC |
| 1778664295 | 975 Count | 989 Count | 894 Count | 0 VDC | 0 VDC |
| 1778662494 | 963 Count | 978 Count | 883 Count | 0 VDC | 0 VDC |
| 1778660693 | 952 Count | 968 Count | 873 Count | 0 VDC | 0 VDC |
| 1778658893 | 942 Count | 959 Count | 864 Count | 0 VDC | 0 VDC |
| 1778657099 | 931 Count | 949 Count | 854 Count | 0 VDC | 0 VDC |
| 1778655298 | 920 Count | 939 Count | 844 Count | 0 VDC | 0 VDC |
| 1778653497 | 904 Count | 924 Count | 829 Count | 0 VDC | 0 VDC |
| 1778651697 | 893 Count | 914 Count | 819 Count | 0 VDC | 0 VDC |
| 1778649896 | 882 Count | 904 Count | 809 Count | 0 VDC | 0 VDC |
| 1778648096 | 865 Count | 886 Count | 793 Count | 0 VDC | 0 VDC |
| 1778646295 | 854 Count | 876 Count | 783 Count | 0 VDC | 0 VDC |
| 1778644494 | 843 Count | 866 Count | 773 Count | 0 VDC | 0 VDC |
| 1778642694 | 833 Count | 857 Count | 764 Count | 0 VDC | 0 VDC |
| 1778640893 | 823 Count | 848 Count | 755 Count | 0 VDC | 0 VDC |
| 1778639092 | 812 Count | 838 Count | 745 Count | 0 VDC | 0 VDC |
| 1778637292 | 801 Count | 828 Count | 735 Count | 0 VDC | 0 VDC |
| 1778613896 | 658 Count | 668 Count | 605 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)