This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777376558 | 234 Count | 704 Count | 177 Count | 0 VDC | 0 VDC |
| 1777374758 | 231 Count | 687 Count | 175 Count | 0 VDC | 0 VDC |
| 1777372957 | 228 Count | 678 Count | 173 Count | 0 VDC | 0 VDC |
| 1777371156 | 222 Count | 666 Count | 168 Count | 0 VDC | 0 VDC |
| 1777369356 | 217 Count | 649 Count | 164 Count | 0 VDC | 0 VDC |
| 1777367555 | 214 Count | 640 Count | 162 Count | 0 VDC | 0 VDC |
| 1777365754 | 209 Count | 629 Count | 158 Count | 0 VDC | 0 VDC |
| 1777363961 | 206 Count | 620 Count | 156 Count | 0 VDC | 0 VDC |
| 1777362160 | 203 Count | 606 Count | 154 Count | 0 VDC | 0 VDC |
| 1777360359 | 200 Count | 598 Count | 152 Count | 0 VDC | 0 VDC |
| 1777358558 | 182 Count | 570 Count | 135 Count | 0 VDC | 0 VDC |
| 1777356758 | 179 Count | 561 Count | 133 Count | 0 VDC | 0 VDC |
| 1777354957 | 176 Count | 552 Count | 131 Count | 0 VDC | 0 VDC |
| 1777353156 | 173 Count | 523 Count | 129 Count | 0 VDC | 0 VDC |
| 1777351356 | 170 Count | 508 Count | 127 Count | 0 VDC | 0 VDC |
| 1777349555 | 164 Count | 497 Count | 122 Count | 0 VDC | 0 VDC |
| 1777347754 | 161 Count | 483 Count | 120 Count | 0 VDC | 0 VDC |
| 1777345954 | 158 Count | 475 Count | 118 Count | 0 VDC | 0 VDC |
| 1777344153 | 155 Count | 466 Count | 116 Count | 0 VDC | 0 VDC |
| 1777342359 | 152 Count | 456 Count | 114 Count | 0 VDC | 0 VDC |
| 1777340559 | 149 Count | 443 Count | 112 Count | 0 VDC | 0 VDC |
| 1777338758 | 147 Count | 433 Count | 111 Count | 0 VDC | 0 VDC |
| 1777336957 | 144 Count | 424 Count | 109 Count | 0 VDC | 0 VDC |
| 1777335157 | 141 Count | 415 Count | 107 Count | 0 VDC | 0 VDC |
| 1777333356 | 138 Count | 406 Count | 105 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)