This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1778716395 | 4 V | 0 V | 356 mW | 28.8 degC | 101762.5 Pa |
| 1778715294 | 4 V | 0 V | 358 mW | 28.9 degC | 101762.5 Pa |
| 1778714686 | 4 V | 0 V | 358 mW | 28.9 degC | 101775 Pa |
| 1778714557 | 4 V | 0 V | 358 mW | 28.9 degC | 101775 Pa |
| 1778712828 | 4 V | 0 V | 384 mW | 29.1 degC | 101775 Pa |
| 1778712757 | 4 V | 0 V | 414 mW | 29.5 degC | 101775 Pa |
| 1778712741 | 3.99 V | 0 V | 314 mW | 29.2 degC | 101775 Pa |
| 1778712740 | 4 V | 0 V | 372 mW | 29.2 degC | 101775 Pa |
| 1778712727 | 4 V | 0 V | 300 mW | 29 degC | 101762.5 Pa |
| 1778710937 | 4 V | 0 V | 254 mW | 29 degC | 101775 Pa |
| 1778708097 | 4 V | 0 V | 144 mW | 24.3 degC | 101750 Pa |
| 1778707735 | 3.99 V | 0 V | 144 mW | 26.2 degC | 101737.5 Pa |
| 1778707414 | 4 V | 0 V | 150 mW | 25.9 degC | 101737.5 Pa |
| 1778705968 | 4 V | 0 V | 146 mW | 26.6 degC | 101725 Pa |
| 1778705542 | 4 V | 0 V | 134 mW | 23.7 degC | 101725 Pa |
| 1778704522 | 4 V | 0 V | 134 mW | 23.5 degC | 101712.5 Pa |
| 1778704103 | 4 V | 0 V | 136 mW | 24.5 degC | 101687.5 Pa |
| 1778703748 | 4 V | 0 V | 134 mW | 24.2 degC | 101700 Pa |
| 1778702254 | 4 V | 0 V | 132 mW | 23.6 degC | 101687.5 Pa |
| 1778701977 | 4 V | 0 V | 130 mW | 23.8 degC | 101675 Pa |
| 1778700899 | 4 V | 0 V | 134 mW | 23.6 degC | 101650 Pa |
| 1778700455 | 4 V | 0 V | 136 mW | 24 degC | 101650 Pa |
| 1778700165 | 4 V | 0 V | 136 mW | 24.7 degC | 101650 Pa |
| 1778698681 | 4 V | 0 V | 132 mW | 23.8 degC | 101650 Pa |
| 1778698351 | 3.99 V | 0 V | 132 mW | 24.4 degC | 101637.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)