This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792902273 | 283 Count | 999 Count | 250 Count | 0 VDC | 0 VDC |
| 1792900470 | 271 Count | 960 Count | 239 Count | 0 VDC | 0 VDC |
| 1792898667 | 260 Count | 922 Count | 229 Count | 0 VDC | 0 VDC |
| 1792896864 | 249 Count | 885 Count | 219 Count | 0 VDC | 0 VDC |
| 1792895061 | 236 Count | 847 Count | 207 Count | 0 VDC | 0 VDC |
| 1792893258 | 227 Count | 812 Count | 199 Count | 0 VDC | 0 VDC |
| 1792891455 | 215 Count | 776 Count | 188 Count | 0 VDC | 0 VDC |
| 1792889652 | 204 Count | 741 Count | 178 Count | 0 VDC | 0 VDC |
| 1792887849 | 192 Count | 701 Count | 167 Count | 0 VDC | 0 VDC |
| 1792886046 | 180 Count | 661 Count | 156 Count | 0 VDC | 0 VDC |
| 1792884243 | 172 Count | 625 Count | 149 Count | 0 VDC | 0 VDC |
| 1792882474 | 158 Count | 588 Count | 140 Count | 0 VDC | 0 VDC |
| 1792880671 | 150 Count | 552 Count | 133 Count | 0 VDC | 0 VDC |
| 1792878868 | 140 Count | 512 Count | 124 Count | 0 VDC | 0 VDC |
| 1792877064 | 131 Count | 475 Count | 116 Count | 0 VDC | 0 VDC |
| 1792875262 | 122 Count | 438 Count | 108 Count | 0 VDC | 0 VDC |
| 1792873458 | 110 Count | 398 Count | 97 Count | 0 VDC | 0 VDC |
| 1792871655 | 102 Count | 361 Count | 90 Count | 0 VDC | 0 VDC |
| 1792869852 | 92 Count | 318 Count | 81 Count | 0 VDC | 0 VDC |
| 1792868049 | 83 Count | 275 Count | 73 Count | 0 VDC | 0 VDC |
| 1792866246 | 72 Count | 235 Count | 63 Count | 0 VDC | 0 VDC |
| 1792864443 | 61 Count | 195 Count | 53 Count | 0 VDC | 0 VDC |
| 1792862640 | 48 Count | 156 Count | 41 Count | 0 VDC | 0 VDC |
| 1792860871 | 33 Count | 116 Count | 31 Count | 0 VDC | 0 VDC |
| 1792859068 | 21 Count | 75 Count | 20 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)