This is the latest recevied telemetry packets stored in our database for station/object SP9WKL-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777361964 | 539 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1777360163 | 538 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1777358363 | 537 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777356562 | 536 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777354761 | 535 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777352961 | 534 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777351160 | 533 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777349359 | 532 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777323270 | 531 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777321469 | 530 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777319668 | 529 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777317868 | 528 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777316067 | 527 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777314266 | 526 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777312466 | 525 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1777310665 | 524 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1777308871 | 523 Count | 846 Count | 0 Count | 0 VDC | 0 VDC |
| 1777307070 | 522 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777305270 | 521 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777303469 | 520 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777301668 | 519 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777299867 | 518 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777298067 | 517 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777296266 | 516 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1777294465 | 515 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)