K0FTT Automobiles

My position About ☰

reset

OK4JL-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4JL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Satellite*
1768762105	11.92 °C	36.66 %	1594.7 hPa	0
1768761863	11.91 °C	36.97 %	1594.7 hPa	0
1768739902	25.8 °C	40.38 %	992.7 hPa	11
1768739842	25.79 °C	39.83 %	992.7 hPa	11
1768739782	25.79 °C	39.79 %	992.7 hPa	11
1768739722	25.79 °C	39.77 %	992.7 hPa	12
1768739662	25.8 °C	39.75 %	992.8 hPa	12
1768739602	25.8 °C	39.75 %	992.8 hPa	12
1768739542	25.81 °C	39.66 %	992.8 hPa	12
1768739483	25.82 °C	39.61 %	992.8 hPa	12
1768739422	25.84 °C	39.54 %	992.8 hPa	12
1768739362	25.84 °C	39.49 %	992.8 hPa	11
1768739242	25.84 °C	39.47 %	992.8 hPa	12
1768739182	25.85 °C	39.48 %	992.8 hPa	11
1768739122	25.85 °C	39.56 %	992.8 hPa	12
1768739062	25.85 °C	39.53 %	992.8 hPa	12
1768739002	25.85 °C	39.54 %	992.8 hPa	12
1768738942	25.86 °C	39.6 %	992.8 hPa	12
1768738884	25.86 °C	39.63 %	992.8 hPa	12
1768738822	25.86 °C	39.67 %	992.8 hPa	12
1768738762	25.86 °C	39.71 %	992.8 hPa	12
1768738702	25.86 °C	39.7 %	992.9 hPa	12
1768738642	25.86 °C	39.7 %	992.9 hPa	12
1768738582	25.86 °C	39.72 %	992.9 hPa	12
1768738522	25.86 °C	39.72 %	992.9 hPa	12

*Used Equation Coefficients:

Temperatu: 0, 0.01, 5

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)