This is the latest recevied telemetry packets stored in our database for station/object SP8PB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781417652 | 326 Count | 537 Count | 200 Count | 0 VDC | 0 VDC |
| 1781416751 | 323 Count | 532 Count | 198 Count | 0 VDC | 0 VDC |
| 1781415850 | 320 Count | 527 Count | 196 Count | 0 VDC | 0 VDC |
| 1781414950 | 317 Count | 520 Count | 194 Count | 0 VDC | 0 VDC |
| 1781414116 | 311 Count | 517 Count | 193 Count | 0 VDC | 0 VDC |
| 1781413215 | 309 Count | 513 Count | 192 Count | 0 VDC | 0 VDC |
| 1781412314 | 306 Count | 508 Count | 190 Count | 0 VDC | 0 VDC |
| 1781411414 | 303 Count | 503 Count | 188 Count | 0 VDC | 0 VDC |
| 1781410513 | 300 Count | 498 Count | 186 Count | 0 VDC | 0 VDC |
| 1781409612 | 297 Count | 494 Count | 184 Count | 0 VDC | 0 VDC |
| 1781408711 | 294 Count | 489 Count | 182 Count | 0 VDC | 0 VDC |
| 1781407811 | 291 Count | 484 Count | 180 Count | 0 VDC | 0 VDC |
| 1781406910 | 288 Count | 479 Count | 178 Count | 0 VDC | 0 VDC |
| 1781406009 | 285 Count | 474 Count | 176 Count | 0 VDC | 0 VDC |
| 1781405108 | 283 Count | 470 Count | 175 Count | 0 VDC | 0 VDC |
| 1781404208 | 280 Count | 466 Count | 173 Count | 0 VDC | 0 VDC |
| 1781403307 | 277 Count | 461 Count | 171 Count | 0 VDC | 0 VDC |
| 1781402406 | 274 Count | 456 Count | 169 Count | 0 VDC | 0 VDC |
| 1781401505 | 271 Count | 451 Count | 167 Count | 0 VDC | 0 VDC |
| 1781400605 | 268 Count | 446 Count | 165 Count | 0 VDC | 0 VDC |
| 1781399704 | 265 Count | 441 Count | 163 Count | 0 VDC | 0 VDC |
| 1781398803 | 262 Count | 436 Count | 161 Count | 0 VDC | 0 VDC |
| 1781397903 | 259 Count | 431 Count | 159 Count | 0 VDC | 0 VDC |
| 1781397002 | 257 Count | 427 Count | 158 Count | 0 VDC | 0 VDC |
| 1781396101 | 254 Count | 422 Count | 156 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)