This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754172425 | 40 Count | 252 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754170626 | 38 Count | 236 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754168826 | 36 Count | 210 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754167027 | 34 Count | 202 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754165226 | 32 Count | 193 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754163427 | 30 Count | 185 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754161628 | 28 Count | 175 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1754159828 | 26 Count | 166 Count | 0 Count | 4.11 VDC | 1.92 VDC |
| 1754158028 | 24 Count | 157 Count | 0 Count | 4.11 VDC | 4.72 VDC |
| 1754156230 | 22 Count | 151 Count | 0 Count | 4.11 VDC | 5.06 VDC |
| 1754154431 | 20 Count | 144 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754152632 | 18 Count | 140 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754150836 | 16 Count | 133 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754149035 | 14 Count | 121 Count | 0 Count | 4.11 VDC | 5.14 VDC |
| 1754147235 | 12 Count | 111 Count | 0 Count | 4.11 VDC | 5.14 VDC |
| 1754145436 | 10 Count | 102 Count | 0 Count | 4.11 VDC | 5.14 VDC |
| 1754143636 | 8 Count | 95 Count | 0 Count | 4.11 VDC | 5.14 VDC |
| 1754141836 | 6 Count | 56 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754140036 | 4 Count | 36 Count | 0 Count | 4.12 VDC | 5.14 VDC |
| 1754138235 | 2 Count | 16 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754136436 | 0 Count | 8 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1754134636 | 179 Count | 981 Count | 0 Count | 4.12 VDC | 5.12 VDC |
| 1754132836 | 177 Count | 974 Count | 0 Count | 4.12 VDC | 5.12 VDC |
| 1754131036 | 175 Count | 967 Count | 0 Count | 4.12 VDC | 5.1 VDC |
| 1754129236 | 173 Count | 938 Count | 0 Count | 4.12 VDC | 5.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)