This is the latest recevied telemetry packets stored in our database for station/object SR2DTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783233792 | 216 Count | 187 Count | 22 Count | 0 VDC | 0 VDC |
| 1783232111 | 215 Count | 184 Count | 22 Count | 0 VDC | 0 VDC |
| 1783230430 | 214 Count | 183 Count | 22 Count | 0 VDC | 0 VDC |
| 1783228750 | 213 Count | 183 Count | 22 Count | 0 VDC | 0 VDC |
| 1783227069 | 212 Count | 183 Count | 22 Count | 0 VDC | 0 VDC |
| 1783225388 | 211 Count | 180 Count | 22 Count | 0 VDC | 0 VDC |
| 1783223707 | 210 Count | 178 Count | 22 Count | 0 VDC | 0 VDC |
| 1783222027 | 209 Count | 174 Count | 22 Count | 0 VDC | 0 VDC |
| 1783220346 | 208 Count | 165 Count | 22 Count | 0 VDC | 0 VDC |
| 1783218665 | 207 Count | 158 Count | 22 Count | 0 VDC | 0 VDC |
| 1783216984 | 206 Count | 153 Count | 22 Count | 0 VDC | 0 VDC |
| 1783215552 | 201 Count | 153 Count | 22 Count | 0 VDC | 0 VDC |
| 1783213872 | 200 Count | 153 Count | 22 Count | 0 VDC | 0 VDC |
| 1783212191 | 199 Count | 150 Count | 22 Count | 0 VDC | 0 VDC |
| 1783210510 | 198 Count | 146 Count | 22 Count | 0 VDC | 0 VDC |
| 1783208829 | 197 Count | 145 Count | 22 Count | 0 VDC | 0 VDC |
| 1783207148 | 196 Count | 144 Count | 22 Count | 0 VDC | 0 VDC |
| 1783205468 | 195 Count | 142 Count | 22 Count | 0 VDC | 0 VDC |
| 1783203787 | 194 Count | 141 Count | 22 Count | 0 VDC | 0 VDC |
| 1783202106 | 193 Count | 140 Count | 22 Count | 0 VDC | 0 VDC |
| 1783200425 | 192 Count | 137 Count | 22 Count | 0 VDC | 0 VDC |
| 1783198745 | 191 Count | 136 Count | 22 Count | 0 VDC | 0 VDC |
| 1783192270 | 183 Count | 133 Count | 22 Count | 0 VDC | 0 VDC |
| 1783190590 | 182 Count | 133 Count | 22 Count | 0 VDC | 0 VDC |
| 1783188909 | 181 Count | 132 Count | 22 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)