This is the latest recevied telemetry packets stored in our database for station/object SP8RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778670425 | 90 Count | 180 Count | 82 Count | 0 VDC | 0 VDC |
| 1778665636 | 16 Count | 40 Count | 16 Count | 0 VDC | 0 VDC |
| 1778663234 | 450 Count | 983 Count | 417 Count | 0 VDC | 0 VDC |
| 1778660834 | 419 Count | 921 Count | 388 Count | 0 VDC | 0 VDC |
| 1778653629 | 342 Count | 733 Count | 317 Count | 0 VDC | 0 VDC |
| 1778651226 | 312 Count | 662 Count | 289 Count | 0 VDC | 0 VDC |
| 1778646422 | 258 Count | 528 Count | 240 Count | 0 VDC | 0 VDC |
| 1778641633 | 153 Count | 320 Count | 142 Count | 0 VDC | 0 VDC |
| 1778639231 | 124 Count | 265 Count | 115 Count | 0 VDC | 0 VDC |
| 1778636829 | 98 Count | 209 Count | 91 Count | 0 VDC | 0 VDC |
| 1778634427 | 74 Count | 160 Count | 69 Count | 0 VDC | 0 VDC |
| 1778629625 | 28 Count | 62 Count | 27 Count | 0 VDC | 0 VDC |
| 1778627222 | 486 Count | 1017 Count | 452 Count | 0 VDC | 0 VDC |
| 1778624820 | 454 Count | 927 Count | 423 Count | 0 VDC | 0 VDC |
| 1778617630 | 340 Count | 670 Count | 318 Count | 0 VDC | 0 VDC |
| 1778615229 | 310 Count | 589 Count | 290 Count | 0 VDC | 0 VDC |
| 1778612837 | 279 Count | 521 Count | 261 Count | 0 VDC | 0 VDC |
| 1778610426 | 254 Count | 469 Count | 238 Count | 0 VDC | 0 VDC |
| 1778608024 | 231 Count | 420 Count | 217 Count | 0 VDC | 0 VDC |
| 1778600835 | 111 Count | 234 Count | 107 Count | 0 VDC | 0 VDC |
| 1778598432 | 74 Count | 154 Count | 72 Count | 0 VDC | 0 VDC |
| 1778596030 | 17 Count | 39 Count | 17 Count | 0 VDC | 0 VDC |
| 1778593630 | 391 Count | 958 Count | 371 Count | 0 VDC | 0 VDC |
| 1778591226 | 342 Count | 829 Count | 324 Count | 0 VDC | 0 VDC |
| 1778584020 | 228 Count | 535 Count | 216 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)