K0FTT Automobiles

My position About ☰

reset

VK2GJ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1762206709	3.98 V	108 mW	27.6 degC	99162.5 Pa
1762206350	3.98 V	116 mW	27.6 degC	99162.5 Pa
1762206012	3.97 V	96 mW	27.3 degC	99150 Pa
1762205632	3.98 V	112 mW	27.7 degC	99137.5 Pa
1762205264	3.98 V	98 mW	27 degC	99137.5 Pa
1762204909	3.98 V	130 mW	27.9 degC	99137.5 Pa
1762204591	3.98 V	118 mW	28.8 degC	99125 Pa
1762204220	3.97 V	122 mW	28.6 degC	99125 Pa
1762203840	3.98 V	110 mW	27.6 degC	99112.5 Pa
1762203473	3.98 V	116 mW	28.2 degC	99112.5 Pa
1762203103	3.98 V	112 mW	27.3 degC	99112.5 Pa
1762202742	3.98 V	104 mW	27.5 degC	99100 Pa
1762202382	3.98 V	120 mW	27.7 degC	99087.5 Pa
1762202081	3.98 V	104 mW	27.6 degC	99075 Pa
1762201656	3.98 V	114 mW	27.5 degC	99050 Pa
1762201305	3.98 V	102 mW	27.6 degC	99050 Pa
1762200938	3.98 V	114 mW	27.5 degC	99050 Pa
1762200577	3.98 V	98 mW	26.9 degC	99037.5 Pa
1762200211	3.98 V	112 mW	27.3 degC	99025 Pa
1762199856	3.98 V	104 mW	27 degC	99012.5 Pa
1762199495	3.98 V	106 mW	27.7 degC	99025 Pa
1762199133	3.98 V	112 mW	27.5 degC	99000 Pa
1762198775	3.97 V	102 mW	27.7 degC	98975 Pa
1762198417	3.98 V	122 mW	27.9 degC	98987.5 Pa
1762198099	3.98 V	100 mW	27.4 degC	99012.5 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)