This is the latest recevied telemetry packets stored in our database for station/object SL6ZAQ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746296169 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746295269 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746294369 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746293469 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746292569 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1746291669 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746290769 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746289869 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746288968 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746288068 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746287168 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746286268 | 4 VDC | 0 | 0 | 0 | 0 |
| 1746285368 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746284468 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746283568 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746282668 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746281767 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746280867 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746279967 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746279067 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746278167 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746277267 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746276367 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1746275467 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1746274567 | 4.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)