This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762249044 | 427 | 603 | 0 | 0 | 0 |
| 1762247254 | 427 | 604 | 0 | 0 | 0 |
| 1762245464 | 485 | 606 | 0 | 0 | 0 |
| 1762243674 | 432 | 607 | 0 | 0 | 0 |
| 1762241884 | 428 | 607 | 0 | 0 | 0 |
| 1762240102 | 490 | 610 | 0 | 0 | 0 |
| 1762238303 | 429 | 608 | 0 | 0 | 0 |
| 1762236512 | 469 | 609 | 0 | 0 | 0 |
| 1762234721 | 428 | 610 | 0 | 0 | 0 |
| 1762232930 | 436 | 612 | 0 | 0 | 0 |
| 1762231139 | 427 | 611 | 0 | 0 | 0 |
| 1762229349 | 429 | 611 | 0 | 0 | 0 |
| 1762227558 | 437 | 614 | 0 | 0 | 0 |
| 1762225767 | 442 | 614 | 0 | 0 | 0 |
| 1762222184 | 431 | 616 | 0 | 0 | 0 |
| 1762220393 | 496 | 619 | 0 | 0 | 0 |
| 1762218601 | 443 | 619 | 0 | 0 | 0 |
| 1762216809 | 427 | 619 | 0 | 0 | 0 |
| 1762215018 | 430 | 621 | 0 | 0 | 0 |
| 1762213225 | 436 | 623 | 0 | 0 | 0 |
| 1762211432 | 455 | 625 | 0 | 0 | 0 |
| 1762209639 | 427 | 626 | 0 | 0 | 0 |
| 1762207846 | 429 | 628 | 0 | 0 | 0 |
| 1762206052 | 439 | 634 | 0 | 0 | 0 |
| 1762204258 | 440 | 630 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)