This is the latest recevied telemetry packets stored in our database for station/object SP9KPS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792904040 | 101 Count | 755 Count | 94 Count | 0 VDC | 0 VDC |
| 1792902240 | 93 Count | 670 Count | 87 Count | 0 VDC | 0 VDC |
| 1792900439 | 79 Count | 588 Count | 74 Count | 0 VDC | 0 VDC |
| 1792898638 | 69 Count | 497 Count | 65 Count | 0 VDC | 0 VDC |
| 1792896849 | 54 Count | 404 Count | 51 Count | 0 VDC | 0 VDC |
| 1792895047 | 36 Count | 292 Count | 34 Count | 0 VDC | 0 VDC |
| 1792893246 | 23 Count | 205 Count | 22 Count | 0 VDC | 0 VDC |
| 1792891445 | 13 Count | 106 Count | 13 Count | 0 VDC | 0 VDC |
| 1792889644 | 131 Count | 1073 Count | 121 Count | 0 VDC | 0 VDC |
| 1792887844 | 119 Count | 982 Count | 110 Count | 0 VDC | 0 VDC |
| 1792886043 | 106 Count | 888 Count | 98 Count | 0 VDC | 0 VDC |
| 1792884242 | 96 Count | 801 Count | 89 Count | 0 VDC | 0 VDC |
| 1792882441 | 81 Count | 709 Count | 75 Count | 0 VDC | 0 VDC |
| 1792880640 | 71 Count | 623 Count | 66 Count | 0 VDC | 0 VDC |
| 1792878839 | 60 Count | 526 Count | 56 Count | 0 VDC | 0 VDC |
| 1792877039 | 51 Count | 427 Count | 48 Count | 0 VDC | 0 VDC |
| 1792875248 | 38 Count | 327 Count | 36 Count | 0 VDC | 0 VDC |
| 1792873447 | 22 Count | 227 Count | 21 Count | 0 VDC | 0 VDC |
| 1792871646 | 10 Count | 123 Count | 10 Count | 0 VDC | 0 VDC |
| 1792869845 | 116 Count | 1091 Count | 108 Count | 0 VDC | 0 VDC |
| 1792868044 | 101 Count | 944 Count | 94 Count | 0 VDC | 0 VDC |
| 1792866243 | 83 Count | 757 Count | 77 Count | 0 VDC | 0 VDC |
| 1792864443 | 67 Count | 556 Count | 62 Count | 0 VDC | 0 VDC |
| 1792862641 | 55 Count | 457 Count | 51 Count | 0 VDC | 0 VDC |
| 1792860840 | 40 Count | 354 Count | 37 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)