This is the latest recevied telemetry packets stored in our database for station/object EA4GAX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp.* | Humidity* | Pressure* | Votaje* | Value5* |
---|---|---|---|---|---|
1745989535 | 18 ºC | 57 %RH | 909 hPa | 4 V | 0 |
1745989086 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745988635 | 18 ºC | 55 %RH | 909 hPa | 4 V | 0 |
1745987735 | 18 ºC | 55 %RH | 909 hPa | 4 V | 0 |
1745986835 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745985935 | 18 ºC | 55 %RH | 909 hPa | 3 V | 0 |
1745985586 | 18 ºC | 55 %RH | 909 hPa | 4 V | 0 |
1745985086 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745985035 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745984586 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745984135 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745983235 | 18 ºC | 55 %RH | 909 hPa | 4 V | 0 |
1745983086 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745982586 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745982335 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745982086 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745981586 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745981435 | 18 ºC | 56 %RH | 910 hPa | 4 V | 0 |
1745980582 | 18 ºC | 56 %RH | 910 hPa | 4 V | 0 |
1745980535 | 18 ºC | 55 %RH | 910 hPa | 4 V | 0 |
1745980086 | 18 ºC | 56 %RH | 910 hPa | 4 V | 0 |
1745979635 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745979582 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
1745978735 | 18 ºC | 56 %RH | 909 hPa | 3 V | 0 |
1745977835 | 18 ºC | 56 %RH | 909 hPa | 4 V | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Votaje: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)