This is the latest recevied telemetry packets stored in our database for station/object SP9XWW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762022028 | 12 | 723 | 401 | 19 | 0 |
| 1762021629 | 12 | 732 | 400 | 19 | 0 |
| 1762021508 | 12 | 733 | 399 | 18 | 0 |
| 1762021379 | 12 | 735 | 399 | 19 | 0 |
| 1762021035 | 12 | 736 | 398 | 20 | 0 |
| 1762020598 | 12 | 731 | 398 | 20 | 0 |
| 1762019390 | 12 | 720 | 395 | 20 | 0 |
| 1762018493 | 12 | 711 | 394 | 20 | 0 |
| 1762018379 | 12 | 709 | 394 | 19 | 0 |
| 1762018274 | 12 | 705 | 394 | 18 | 0 |
| 1762017926 | 12 | 708 | 393 | 19 | 0 |
| 1762017812 | 12 | 701 | 393 | 18 | 0 |
| 1762017708 | 12 | 691 | 394 | 18 | 0 |
| 1762017593 | 12 | 675 | 394 | 18 | 0 |
| 1762017475 | 12 | 662 | 394 | 19 | 0 |
| 1762017156 | 12 | 658 | 366 | 18 | 0 |
| 1762015952 | 12 | 663 | 368 | 19 | 0 |
| 1762014748 | 12 | 671 | 369 | 19 | 0 |
| 1762013524 | 12 | 681 | 371 | 18 | 0 |
| 1762012363 | 12 | 691 | 374 | 20 | 0 |
| 1762011152 | 12 | 704 | 372 | 20 | 0 |
| 1762009946 | 12 | 714 | 374 | 20 | 0 |
| 1762008735 | 12 | 726 | 376 | 20 | 0 |
| 1762007526 | 12 | 741 | 376 | 19 | 0 |
| 1762006319 | 12 | 753 | 375 | 19 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)