This is the latest recevied telemetry packets stored in our database for station/object IW9GTR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1752744103 | 435 Count | 916 Count | 385 Count | 4.19 VDC | 0 VDC |
1752742293 | 417 Count | 886 Count | 369 Count | 4.28 VDC | 0 VDC |
1752740483 | 396 Count | 853 Count | 350 Count | 4.25 VDC | 0 VDC |
1752738673 | 377 Count | 821 Count | 333 Count | 4.26 VDC | 0 VDC |
1752736864 | 359 Count | 785 Count | 317 Count | 4.24 VDC | 0 VDC |
1752735054 | 338 Count | 757 Count | 298 Count | 4.19 VDC | 0 VDC |
1752733244 | 315 Count | 721 Count | 277 Count | 4.19 VDC | 0 VDC |
1752731434 | 293 Count | 686 Count | 257 Count | 4.24 VDC | 0 VDC |
1752729624 | 276 Count | 653 Count | 242 Count | 4.25 VDC | 0 VDC |
1752727815 | 234 Count | 565 Count | 202 Count | 4.28 VDC | 0 VDC |
1752726122 | 221 Count | 528 Count | 191 Count | 4.19 VDC | 0 VDC |
1752724312 | 205 Count | 485 Count | 177 Count | 4.24 VDC | 0 VDC |
1752722502 | 189 Count | 449 Count | 163 Count | 4.23 VDC | 0 VDC |
1752720692 | 174 Count | 408 Count | 150 Count | 4.28 VDC | 0 VDC |
1752718883 | 160 Count | 368 Count | 138 Count | 4.21 VDC | 0 VDC |
1752717073 | 137 Count | 323 Count | 117 Count | 4.25 VDC | 0 VDC |
1752715263 | 124 Count | 280 Count | 106 Count | 4.27 VDC | 0 VDC |
1752713453 | 107 Count | 232 Count | 91 Count | 4.2 VDC | 0 VDC |
1752711643 | 89 Count | 189 Count | 75 Count | 4.25 VDC | 0 VDC |
1752709834 | 72 Count | 145 Count | 60 Count | 4.19 VDC | 0 VDC |
1752708024 | 55 Count | 102 Count | 45 Count | 4.23 VDC | 0 VDC |
1752706214 | 37 Count | 69 Count | 29 Count | 4.25 VDC | 0 VDC |
1752704466 | 37 Count | 69 Count | 29 Count | 4.19 VDC | 0 VDC |
1752702651 | 37 Count | 69 Count | 29 Count | 4.28 VDC | 0 VDC |
1752700851 | 37 Count | 69 Count | 29 Count | 4.25 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)