This is the latest recevied telemetry packets stored in our database for station/object IU0VBE-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788987092 | 301 Count | 570 Count | 146 Count | 0 VDC | 0 VDC |
| 1788985289 | 300 Count | 570 Count | 146 Count | 0 VDC | 0 VDC |
| 1788983485 | 299 Count | 570 Count | 146 Count | 0 VDC | 0 VDC |
| 1788981682 | 298 Count | 568 Count | 146 Count | 0 VDC | 0 VDC |
| 1788979916 | 296 Count | 564 Count | 145 Count | 0 VDC | 0 VDC |
| 1788978113 | 294 Count | 562 Count | 144 Count | 0 VDC | 0 VDC |
| 1788976310 | 293 Count | 562 Count | 144 Count | 0 VDC | 0 VDC |
| 1788974507 | 292 Count | 562 Count | 144 Count | 0 VDC | 0 VDC |
| 1788972703 | 291 Count | 562 Count | 144 Count | 0 VDC | 0 VDC |
| 1788970900 | 280 Count | 548 Count | 134 Count | 0 VDC | 0 VDC |
| 1788969097 | 279 Count | 543 Count | 134 Count | 0 VDC | 0 VDC |
| 1788967294 | 278 Count | 543 Count | 134 Count | 0 VDC | 0 VDC |
| 1788965491 | 277 Count | 543 Count | 134 Count | 0 VDC | 0 VDC |
| 1788963688 | 276 Count | 540 Count | 134 Count | 0 VDC | 0 VDC |
| 1788961884 | 275 Count | 539 Count | 134 Count | 0 VDC | 0 VDC |
| 1788960081 | 273 Count | 533 Count | 133 Count | 0 VDC | 0 VDC |
| 1788958315 | 270 Count | 529 Count | 131 Count | 0 VDC | 0 VDC |
| 1788956512 | 269 Count | 528 Count | 131 Count | 0 VDC | 0 VDC |
| 1788954709 | 268 Count | 528 Count | 131 Count | 0 VDC | 0 VDC |
| 1788952906 | 267 Count | 528 Count | 131 Count | 0 VDC | 0 VDC |
| 1788951103 | 266 Count | 525 Count | 131 Count | 0 VDC | 0 VDC |
| 1788949300 | 264 Count | 523 Count | 130 Count | 0 VDC | 0 VDC |
| 1788947497 | 263 Count | 523 Count | 130 Count | 0 VDC | 0 VDC |
| 1788945694 | 262 Count | 523 Count | 130 Count | 0 VDC | 0 VDC |
| 1788943891 | 261 Count | 523 Count | 130 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)