This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750587732 | 401 Volts | 615 Deg.F | 306 | 0 | 0 |
| 1750582341 | 401 Volts | 616 Deg.F | 307 | 0 | 0 |
| 1750539010 | 460 Volts | 620 Deg.F | 295 | 0 | 0 |
| 1750538932 | 454 Volts | 620 Deg.F | 291 | 0 | 0 |
| 1750538632 | 459 Volts | 623 Deg.F | 289 | 0 | 0 |
| 1750538591 | 456 Volts | 623 Deg.F | 290 | 0 | 0 |
| 1750538456 | 463 Volts | 623 Deg.F | 282 | 0 | 0 |
| 1750538390 | 462 Volts | 625 Deg.F | 278 | 0 | 0 |
| 1750538330 | 456 Volts | 625 Deg.F | 282 | 0 | 0 |
| 1750538268 | 463 Volts | 628 Deg.F | 490 | 0 | 0 |
| 1750538208 | 457 Volts | 626 Deg.F | 284 | 0 | 0 |
| 1750538148 | 457 Volts | 626 Deg.F | 282 | 0 | 0 |
| 1750538088 | 463 Volts | 626 Deg.F | 279 | 0 | 0 |
| 1750538028 | 458 Volts | 626 Deg.F | 279 | 0 | 0 |
| 1750537922 | 455 Volts | 625 Deg.F | 282 | 0 | 0 |
| 1750537906 | 460 Volts | 625 Deg.F | 283 | 0 | 0 |
| 1750537846 | 454 Volts | 623 Deg.F | 285 | 0 | 0 |
| 1750537840 | 447 Volts | 623 Deg.F | 281 | 0 | 0 |
| 1750537790 | 472 Volts | 623 Deg.F | 289 | 0 | 0 |
| 1750537778 | 458 Volts | 622 Deg.F | 289 | 0 | 0 |
| 1750537756 | 460 Volts | 622 Deg.F | 294 | 0 | 0 |
| 1750537220 | 429 Volts | 624 Deg.F | 286 | 0 | 0 |
| 1750537199 | 437 Volts | 624 Deg.F | 287 | 0 | 0 |
| 1750537135 | 436 Volts | 624 Deg.F | 284 | 0 | 0 |
| 1750537045 | 444 Volts | 627 Deg.F | 494 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)