This is the latest recevied telemetry packets stored in our database for station/object W4KEL-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754135256 | 13.16 | 12.89 | 0 | 0 | 0 |
| 1754135128 | 13.13 | 11.93 | 0 | 0 | 0 |
| 1754135071 | 13.16 | 11.44 | 0 | 0 | 0 |
| 1754135042 | 13.28 | 11.44 | 0 | 0 | 0 |
| 1754135025 | 14.01 | 10.96 | 0 | 0 | 0 |
| 1754081158 | 14.05 | 24.99 | 0 | 0 | 0 |
| 1754081134 | 13.98 | 24.51 | 0 | 0 | 0 |
| 1754081067 | 13.98 | 24.99 | 0 | 0 | 0 |
| 1754081056 | 13.92 | 24.51 | 0 | 0 | 0 |
| 1754081042 | 14.17 | 25.48 | 0 | 0 | 0 |
| 1754080975 | 13.28 | 24.51 | 0 | 0 | 0 |
| 1754080946 | 14.01 | 24.51 | 0 | 0 | 0 |
| 1754080888 | 14.01 | 24.51 | 0 | 0 | 0 |
| 1754080840 | 14.63 | 25.48 | 0 | 0 | 0 |
| 1754080796 | 13.98 | 24.51 | 0 | 0 | 0 |
| 1754080720 | 14.01 | 24.51 | 0 | 0 | 0 |
| 1754080713 | 14.01 | 24.03 | 0 | 0 | 0 |
| 1754080688 | 14.01 | 24.51 | 0 | 0 | 0 |
| 1754080649 | 14.01 | 24.03 | 0 | 0 | 0 |
| 1754080613 | 13.95 | 24.03 | 0 | 0 | 0 |
| 1754080510 | 14.01 | 24.99 | 0 | 0 | 0 |
| 1754080489 | 14.05 | 24.03 | 0 | 0 | 0 |
| 1754080480 | 14.05 | 24.03 | 0 | 0 | 0 |
| 1754080473 | 14.05 | 24.03 | 0 | 0 | 0 |
| 1754080461 | 13.98 | 23.54 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0306, 0
Value2: 0, 0.484, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)