This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781424090 | 845 Count | 864 Count | 600 Count | 0 VDC | 0 VDC |
| 1781423186 | 840 Count | 859 Count | 596 Count | 0 VDC | 0 VDC |
| 1781422282 | 834 Count | 851 Count | 591 Count | 0 VDC | 0 VDC |
| 1781421378 | 830 Count | 847 Count | 588 Count | 0 VDC | 0 VDC |
| 1781420475 | 826 Count | 843 Count | 585 Count | 0 VDC | 0 VDC |
| 1781419660 | 823 Count | 840 Count | 583 Count | 0 VDC | 0 VDC |
| 1781418757 | 820 Count | 837 Count | 581 Count | 0 VDC | 0 VDC |
| 1781417853 | 817 Count | 834 Count | 579 Count | 0 VDC | 0 VDC |
| 1781416949 | 812 Count | 827 Count | 575 Count | 0 VDC | 0 VDC |
| 1781416046 | 810 Count | 826 Count | 574 Count | 0 VDC | 0 VDC |
| 1781415142 | 806 Count | 821 Count | 571 Count | 0 VDC | 0 VDC |
| 1781414238 | 801 Count | 816 Count | 567 Count | 0 VDC | 0 VDC |
| 1781413334 | 798 Count | 814 Count | 565 Count | 0 VDC | 0 VDC |
| 1781412431 | 795 Count | 812 Count | 563 Count | 0 VDC | 0 VDC |
| 1781411527 | 792 Count | 809 Count | 561 Count | 0 VDC | 0 VDC |
| 1781410623 | 789 Count | 806 Count | 559 Count | 0 VDC | 0 VDC |
| 1781409720 | 787 Count | 805 Count | 558 Count | 0 VDC | 0 VDC |
| 1781408816 | 784 Count | 803 Count | 556 Count | 0 VDC | 0 VDC |
| 1781407912 | 781 Count | 801 Count | 554 Count | 0 VDC | 0 VDC |
| 1781407008 | 779 Count | 800 Count | 553 Count | 0 VDC | 0 VDC |
| 1781406105 | 777 Count | 799 Count | 552 Count | 0 VDC | 0 VDC |
| 1781405200 | 772 Count | 793 Count | 548 Count | 0 VDC | 0 VDC |
| 1781404296 | 770 Count | 792 Count | 547 Count | 0 VDC | 0 VDC |
| 1781403392 | 767 Count | 790 Count | 545 Count | 0 VDC | 0 VDC |
| 1781402489 | 765 Count | 789 Count | 544 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)