This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793631619 | 587 Count | 729 Count | 0 Count | 0 VDC | 0 VDC |
| 1793629819 | 583 Count | 725 Count | 0 Count | 0 VDC | 0 VDC |
| 1793628018 | 579 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1793626217 | 575 Count | 717 Count | 0 Count | 0 VDC | 0 VDC |
| 1793624416 | 571 Count | 713 Count | 0 Count | 0 VDC | 0 VDC |
| 1793622624 | 567 Count | 709 Count | 0 Count | 0 VDC | 0 VDC |
| 1793620824 | 563 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1793619023 | 559 Count | 673 Count | 0 Count | 0 VDC | 0 VDC |
| 1793617222 | 555 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1793615421 | 551 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1793613620 | 547 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
| 1793611819 | 543 Count | 657 Count | 0 Count | 0 VDC | 0 VDC |
| 1793610019 | 539 Count | 653 Count | 0 Count | 0 VDC | 0 VDC |
| 1793608218 | 535 Count | 649 Count | 0 Count | 0 VDC | 0 VDC |
| 1793606417 | 531 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1793604616 | 527 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1793602816 | 523 Count | 637 Count | 0 Count | 0 VDC | 0 VDC |
| 1793601024 | 519 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1793599223 | 515 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1793597422 | 511 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1793595621 | 507 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1793593820 | 504 Count | 618 Count | 0 Count | 0 VDC | 0 VDC |
| 1793592019 | 500 Count | 614 Count | 0 Count | 0 VDC | 0 VDC |
| 1793590219 | 496 Count | 610 Count | 0 Count | 0 VDC | 0 VDC |
| 1793588418 | 492 Count | 606 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)