This is the latest recevied telemetry packets stored in our database for station/object F5ZMX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788983054 | 424 Count | 663 Count | 369 Count | 0 VDC | 0 VDC |
| 1788982151 | 419 Count | 655 Count | 365 Count | 0 VDC | 0 VDC |
| 1788981247 | 413 Count | 645 Count | 360 Count | 0 VDC | 0 VDC |
| 1788980344 | 408 Count | 639 Count | 356 Count | 0 VDC | 0 VDC |
| 1788979441 | 402 Count | 630 Count | 351 Count | 0 VDC | 0 VDC |
| 1788978537 | 397 Count | 622 Count | 347 Count | 0 VDC | 0 VDC |
| 1788977634 | 390 Count | 612 Count | 341 Count | 0 VDC | 0 VDC |
| 1788976730 | 385 Count | 606 Count | 337 Count | 0 VDC | 0 VDC |
| 1788975827 | 381 Count | 599 Count | 334 Count | 0 VDC | 0 VDC |
| 1788974924 | 375 Count | 592 Count | 329 Count | 0 VDC | 0 VDC |
| 1788974020 | 369 Count | 582 Count | 324 Count | 0 VDC | 0 VDC |
| 1788973116 | 364 Count | 574 Count | 320 Count | 0 VDC | 0 VDC |
| 1788972213 | 358 Count | 565 Count | 315 Count | 0 VDC | 0 VDC |
| 1788971310 | 352 Count | 556 Count | 310 Count | 0 VDC | 0 VDC |
| 1788970406 | 345 Count | 545 Count | 304 Count | 0 VDC | 0 VDC |
| 1788969503 | 339 Count | 532 Count | 299 Count | 0 VDC | 0 VDC |
| 1788968681 | 333 Count | 525 Count | 294 Count | 0 VDC | 0 VDC |
| 1788967777 | 326 Count | 516 Count | 288 Count | 0 VDC | 0 VDC |
| 1788966874 | 317 Count | 504 Count | 280 Count | 0 VDC | 0 VDC |
| 1788965971 | 309 Count | 492 Count | 273 Count | 0 VDC | 0 VDC |
| 1788965067 | 303 Count | 479 Count | 268 Count | 0 VDC | 0 VDC |
| 1788964164 | 291 Count | 457 Count | 257 Count | 0 VDC | 0 VDC |
| 1788963260 | 277 Count | 414 Count | 244 Count | 0 VDC | 0 VDC |
| 1788962357 | 252 Count | 382 Count | 220 Count | 0 VDC | 0 VDC |
| 1788961454 | 247 Count | 375 Count | 216 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)