This is the latest recevied telemetry packets stored in our database for station/object VK2BLS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762227624 | 11.84 Volts | 22.48 Deg.C | 0 | 0 | 0 |
| 1762226723 | 11.81 Volts | 32.96 Deg.C | 0 | 0 | 0 |
| 1762225823 | 11.84 Volts | 32.48 Deg.C | 0 | 0 | 0 |
| 1762224922 | 11.84 Volts | 32.48 Deg.C | 0 | 0 | 0 |
| 1762224022 | 11.81 Volts | 31.99 Deg.C | 0 | 0 | 0 |
| 1762223121 | 11.84 Volts | 31.99 Deg.C | 0 | 0 | 0 |
| 1762222220 | 11.84 Volts | 32.48 Deg.C | 0 | 0 | 0 |
| 1762221320 | 11.84 Volts | 31.5 Deg.C | 0 | 0 | 0 |
| 1762220606 | 11.84 Volts | 31.01 Deg.C | 0 | 0 | 0 |
| 1762219705 | 11.84 Volts | 30.52 Deg.C | 0 | 0 | 0 |
| 1762218805 | 11.84 Volts | 30.03 Deg.C | 0 | 0 | 0 |
| 1762217905 | 11.84 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1762217005 | 11.81 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1762216839 | 11.84 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1762216490 | 11.84 Volts | 31.01 Deg.C | 0 | 0 | 0 |
| 1762215590 | 11.84 Volts | 31.5 Deg.C | 0 | 0 | 0 |
| 1762214690 | 11.84 Volts | 31.5 Deg.C | 0 | 0 | 0 |
| 1762213789 | 11.84 Volts | 31.01 Deg.C | 0 | 0 | 0 |
| 1762208243 | 11.84 Volts | 28.56 Deg.C | 0 | 0 | 0 |
| 1762207568 | 11.84 Volts | 31.5 Deg.C | 0 | 0 | 0 |
| 1762206667 | 11.84 Volts | 31.01 Deg.C | 0 | 0 | 0 |
| 1762205767 | 11.84 Volts | 30.52 Deg.C | 0 | 0 | 0 |
| 1762204867 | 11.84 Volts | 30.03 Deg.C | 0 | 0 | 0 |
| 1762203967 | 11.84 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1762203066 | 11.84 Volts | 29.54 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.489, -283.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)