This is the latest recevied telemetry packets stored in our database for station/object SP7THR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1753406859 | 0 Count | 501 Count | 0 Count | 0 VDC | 0 VDC |
| 1753405658 | 0 Count | 494 Count | 0 Count | 0 VDC | 0 VDC |
| 1753404458 | 0 Count | 476 Count | 0 Count | 0 VDC | 0 VDC |
| 1753403258 | 0 Count | 464 Count | 0 Count | 0 VDC | 0 VDC |
| 1753402058 | 0 Count | 459 Count | 0 Count | 0 VDC | 0 VDC |
| 1753400858 | 0 Count | 453 Count | 0 Count | 0 VDC | 0 VDC |
| 1753399658 | 0 Count | 448 Count | 0 Count | 0 VDC | 0 VDC |
| 1753398458 | 0 Count | 443 Count | 0 Count | 0 VDC | 0 VDC |
| 1753397260 | 0 Count | 438 Count | 0 Count | 0 VDC | 0 VDC |
| 1753396060 | 0 Count | 438 Count | 0 Count | 0 VDC | 0 VDC |
| 1753394860 | 0 Count | 434 Count | 0 Count | 0 VDC | 0 VDC |
| 1753393660 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753392460 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753391259 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753390059 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753388859 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753387659 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1753386459 | 0 Count | 419 Count | 0 Count | 0 VDC | 0 VDC |
| 1753385259 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753384058 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753382857 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753381657 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753380457 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753379257 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1753378057 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)